Results 1 to 6 of 6
Thread: Just picked up a 07 GP1300R
-
05-30-2014, 08:44 PM #1
Just picked up a 07 GP1300R
Just picked her up last night off a tip from another hulk member. Been looking on and off for a fuel injected ski to replace my GP1200R. Carbs are easy but I got sick of adjusting them every time I changed something. Meter says 190 hours. Compression is 115 psi all across. Has a Riva Stage 1 kit, d plate, and I don't know what else. I haven't really gone through it yet except for a wash and wax as well as swapping the plastic steering nozzle for a Riva. Ski starts right up. I hope to get it in the water tomorrow. Anything i should do to this ski? I plan to use it as a spare ski when some of my buddies who dont have skis want to come along. My 1200 will be for sale shortly.
-
06-01-2014, 10:11 AM #2
Got it in the water and it runs pretty good. Got a cat temp light and saw no chip was installed so I just fixed that. It porpoises like crazy so I will have to shim the ride plate some. Taking it out again today.
-
06-01-2014, 07:49 PM #3
Thats a beauty of a ski.
I almost got one but didnt want to blow 3 grand on another ski when I need a car ;( I might get one in the future to replace my ultra.
how much was your ski?
-
06-03-2014, 05:48 PM #4
I paid $4500 for it. I've been looking on and off for one for about 2 years and they are usually over 5 grand.
-
06-03-2014, 11:18 PM #5
Great looking ski! I'd say drop a 1390 into it and blow away any stock 4 stroke on the water. But seriously, a few mods will easily get you close to 70...I'd suggest the same stuff you did to your 1200, minus the carb stuff obviously. I don't know too much about the EFI skis, but a good plate and grate are a must, as well as sealing the pump like on the 1200.
-
06-04-2014, 10:59 AM #6
Thanks. It already has a Riva stage 1 I think. Looks like the ride plate, grate, and trim tabs are there. Not sure about the prop. I haven't really gone through the ski. I just want an extra ski to have as a backup and for my girl to ride whens he comes along. I don't plan to do too much to it, but then again I always say that.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Just picked up a GP1300R- Need some advice!
By ktyamaha36 in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 11-04-2016, 08:08 PM -
Just picked up a 07 ultra 250x, what to look for while thoroughly looking over it?
By 98gsxl951 in forum Kawasaki PWC Performance (4-stroke)Replies: 35Last Post: 04-07-2011, 07:35 AM -
Just picked up a 95 xp (720)
By ADAMBOMB in forum 2-Stroke PerformanceReplies: 4Last Post: 06-29-2007, 09:33 PM -
just picked up my ultra 250
By GDM in forum Kawasaki PWC Performance (4-stroke)Replies: 6Last Post: 04-30-2007, 09:57 PM -
Just Picked up my '06 RXP
By ramnj in forum Sea Doo Open DiscussionReplies: 32Last Post: 04-08-2006, 05:55 PM
Use a good amount of silicone around those eyelits doesn't matter if...
Ultra 150 Shredmaster 2 breather...