Results 1 to 3 of 3
Thread: Fx sho speed and rpm
-
05-25-2014, 06:22 PM #1
- Join Date
- Oct 2013
- Posts
- 21
Fx sho speed and rpm
Heh guys I recently changed my impeller on my stock 2010 fx sho.. From stand still, off the mark I'm hitting Aprox 7000rpm And about +\- 64mph top speed not sure what rpm about 7200-7400 will double check but don't recall seeing any higher.. I'm wondering if these are normal readings as I've had cavitation issues since I purchased the ski and used to sit Aprox 8k any time I held the accelerator full.. I believe the impeller i put on was a stock solas.. I'm unsure of the pitch but it's what the dealer recommended. Cheers
-
05-25-2014, 07:16 PM #2
- Join Date
- Aug 2012
- Posts
- 1,406
- +1
- 142
pmed
-
05-26-2014, 04:26 AM #3
- Join Date
- Oct 2013
- Posts
- 21
Just checked the part/model number printed on my impeller is 6S504.
Last edited by Chaseyb093; 05-26-2014 at 05:00 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
help needed on a 2009 fx sho revs and speed
By darren 4tec in forum Yamaha PWC Performance (4-stroke)Replies: 11Last Post: 05-01-2013, 04:29 PM -
Yamaha FX SHO vibrations and noise about 3000-4000 rpm
By paul18187 in forum Yamaha Open DiscussionReplies: 0Last Post: 08-11-2010, 04:10 PM -
FX HO speeds and rpms
By Hypertoys in forum Yamaha PWC Performance (4-stroke)Replies: 15Last Post: 11-20-2007, 03:16 PM -
After sucking up lure, top speed and rpm's dropped
By ercBOOSTED in forum Kawasaki PWC Performance (4-stroke)Replies: 64Last Post: 09-17-2007, 10:30 PM -
Loss of speed and RPMs
By NJ-Ski in forum Sea Doo Open DiscussionReplies: 11Last Post: 07-21-2006, 10:34 AM
Use a good amount of silicone around those eyelits doesn't matter if...
Ultra 150 Shredmaster 2 breather...