Which springs should I buy.

[c.raul]

Hey guys I'm looking for a set of springs for my 14 seadoo rxpx. I'm thinking of spinning 9200rpm what springs should I go with? Rd, riva, or super tech. Or do you guys have any other suggestion. I ride alot of salt water so I hook and un hook alot.

[stuckmoto]

Springs? Super Tech
9200? Lightened valves

[skidoochris]

you want to run 9200 and you come unhooked a lot...
IMO your asking for trouble
if you blow your SC, you most likely will destroy the motor
at 8200 the SC is spinning 49,000 rpm
at 9200 the SC is spinning 55,000 rpm

[BigDaddyRXP]

9200 rpm + unhooking a lot =

[c.raul]

I mean it's not always going to be at 9200. I just need a set of reliable springs that will take good care of my motor when it's needed.

[skidoochris]

I here what your saying but the valve springs IMO are not the weakest link at those high rpms
and I would bet those good springs/valves will not float until closer to 10,000

[c.raul]

I here what your saying but the valve springs IMO are not the weakest link at those high rpms
and I would bet those good springs/valves will not float until closer to 10,000

So you think with springs and retainers I will no major issues?

[c.raul]

Would anyone know what's rd springs seat pressure?