2011 FULLY BUILT Yamaha FZS Waverunner

[FZS Monty]

SOLD!



Selling my Extensively Built Waverunner. See list for full details. Everything works perfectly, engine broken in and dyno tuned at Riva in Pompano Beach FL, and ski was just broken in on the water 4/12/14. Will provide buyer with all needed contacts for further ECU tuning as its capable of 90mph + on GPS. Ski is set up for 500+ HP currently dyno-tuned for 372HP.

Selling because I moved further away from the water, don't get to ride it at all with a very busy schedule.

Load-Rite Trailer with PFD included. E-mail with any questions. Lots of extras will be included: maintenance items, special tools, shop cart etc..

Videos:




SUPERCHARGER/INTERCOOLER/INTAKE:
R&D Water-Cooled Supercharger Housing with ET18 psi supercharger wheel.
Riva Racing Gen-3 supercharger shaft.
Riva Racing Gen-2 Intercooler with HKS BOV. Inline water filter for I/C.
Riva Racing Ribbon Delete.
Ported Throttle Body by Ross Racing.

Exhaust manifold painted with G2 high temp paint.
Riva Racing Exhaust Water box.
Riva Racing Throuh Hull Exhaust.

JET UNIT/HANDLING:
Riva Racing Billet Driveshaft Sleeve.
Pump tunnel sealed with 5200.
R&D Intake Grate.
Fiberglass Pump Tunnel Reinforcement.
Riva Racing Billet Backing Plates.
VX custom modified Ride Plate by Jim's Performance.
Riva Racing 160mm Stainless Jet Pump with 15/23 prop.
Riva Racing Adjustable Jet Nozzle with 86mm Ring.
R&D Hydro Force Steering Nozzle.
Macc Racing Sponsons.
Riva Racing Adjustable Handle Bars, ODI Grips.


FUEL/ECU:
Riva Racing 340LPH Fuel Pump.
Riva Racing 55psi static Regulator.
Riva Racing 1000cc injectors.
Riva Racing 3 BAR Map Sensor.
Vi-PEC V88R ECU, Custom Dyno Tuned calibration.
Vi-PEC Dash Logger with Vi-Pec O2 LC-1 Sensor kit.
Li3 R&D Battery.

ENGINE/HEAD:
Riva Racing Adjustable Cam Sprocket Kit: +5 degrees on intake and -2 degrees on
exhaust for " mid to top range" setup.
Stock Camshafts drilled, tapped, plugged.
Riva Racing Titanium valve retainers and heavy-duty valve springs.
Riva Racing +1mm Oversized Valves: Stainless intake, Inconel Exhaust.
Rad4Racing Intake Manifold Isolator.
ARP Head Stud kit.

BLOCK:
Darton Sleeved Block.
Carillo Rods and Pistons, stock clearances.
Total Seal Rings.
ARP Main Crankcase Stud kit.
RIVA Pro-Series Cylinder Head Gasket.

2013 Clutch and Idler Gear.
R&D metal clutch cover gasket.
Riva Engine Cooling.
Through Hull Flow Rites, Foam guards removed.

Engine work and ECU tuning performed at Riva Motor sports, Pompano Beach.

ASKING: SKI MUST GO IN THE NEXT 5 DAYS, something urgent came up and i need it sold!
Ca$h, PayPal, or Certified Check. NO Trades...

[carbon]

Whoa

[FZS Monty]

Price Drop! $19,000

[Jmfmk3]

You say it requires further tuning for 90+mph? What is it tuned for now? What mph are you seeing?

[FZS Monty]

You say it requires further tuning for 90+mph? What is it tuned for now? What mph are you seeing?

Its running rich, 10.8 and limited to 8600RPM in the break in video above, did 81 mph. Started the ski a few times since then, but i have zero time to ride it. Needs to be data logged and and sent to Riva.

[FZS Monty]

Pictures of extras:


Not pictured: ski lift harness, ski shop cart, but will be included with sale of ski.

[FZS Monty]

More pictures

[FZS Monty]

More pics as per PM request.

[Leendert]

Sorry to hear you are selling I have a very simmilar ski

[FZS Monty]

Thanks, me too, I just have no time at all to ride it.