Gtr 215 upgrades

[brandon32689]

So basically what's the upgrades to do without breaking my warrinty. Does a grate make much a difference? I've read these skis hit a wall at 74 which is fine but I'd like to get to 70 at least lol

[SCHNORR12]

Nothing really matters until you flash the ECU which will void your warranty.

[brandon32689]

Okay so what will it get to without that.

[dpracing]

It is GPS limited to 67 mph. It will not go any faster without a re flash.........

[skylolow]

Vtech reflash 8375 and pitch prop accordingly. This will push you to 70-71 and be ready to go beyond that.

[raceneked]

GPS limited to 67/8 mph.
There are also torque, timing, boost limiters programmed into the ECU. probably more, I just don't know all of them.

re-flash will eliminate these, but will also void the BRP warranty.
stock valve train is NOT reliable past 8350 rpm.

[brandon32689]

Okay guys thanks, so basically wait till warrinty is gone to mess with any of that. I have a 2 year warranty lol

[skylolow]

Okay guys thanks, so basically wait till warrinty is gone to mess with any of that. I have a 2 year warranty lol

Many dealers will never even look or care if you do a reflash. Really unless you have some major issues there won't be much of a reason to look at the logs. Chances are BRP would have to be heavily involved in the warranty work also. Once again major problems with the ski if there involved.

I would actually go visit a few dealers in your area and inquire about reflashing the ECU. You may find a dealer who offers the service and inquire about how that effects the warranty with them. If they sell it they may just look the other way on future repairs.

[liquid chicken]

like most have said reflash to get beyond 68mph but there are things you can do to improve performance.

sponsons - worx brand
intake grate - worx brand
cold air intake - fizzle brand
cruise control module - seadoo part

i mention those specifically because they are on my want list for my GTR.

[Tiny]

95% of dealers will not sell aftermarket parts. They do not want to deal with the hassle of installing them or the back lash of a customer when they install them and the parts do not perform as described by that manufacturer...