Post your own home made mods

[xdrian]

This a post for anyone to post any good ideas to help improve the spark


So here we go this is mine I found the access cover popping open after wave jumping so I have added an aluminum bracket behind the plastic catch with a 6mm bolt hole then replaced the rubber seal with a neoprene seal.

works well no more popping out and next to no water inside now.

[GasResearch-VT.SE]

Good work... I'll post up some more mod pics when it gets back from the fabricator.

[JohnSWE]

Nice, now that's smart.

[xdrian]

Here is another one

Bin Strap Velcro

Just raps around the bottom then lock down cheap eazy

I know the rubber latches look nice but don't think they will hold to much weight coming forward doing a bronco

[GasResearch-VT.SE]

Still not available for sale apparently but the old ones bolt up and retrofit nicely.

Speed ties.

[JayDog]

Still not available for sale apparently but the old ones bolt up and retrofit nicely.

Speed ties.

Part number?

[Sparked]

Behind the right side knee panel is a spot for an orange seadoo canister.. I looked around and it was going to cost about $60 delivered for one of there kits which included the canister to fit the spot.. I already have a good torch so $60 was a waste of $$$.. And I'll use it to store other bits too, tools, basic first aid kit etc.. I had most of the bits in the garage so spent a half hour out there and came up with this idea.. I used stretch cord to secure in along with a Velcro strip at one end to hold it straight..

I had been keeping the torch under the seat but have been pulled up by water police for a safety check twice the last 3 times out and taking the seat off when out on the water is a pain I the arse.. I do have the storage bin but this way it's free for other things

[xdrian]

good idea I have thought of doing smilier I like the elastic strap to stop hitting steering arm I mite try that

Behind the right side knee panel is a spot for an orange seadoo canister.. I looked around and it was going to cost about $60 delivered for one of there kits which included the canister to fit the spot.. I already have a good torch so $60 was a waste of $$$.. And I'll use it to store other bits too, tools, basic first aid kit etc.. I had most of the bits in the garage so spent a half hour out there and came up with this idea.. I used stretch cord to secure in along with a Velcro strip at one end to hold it straight..

I had been keeping the torch under the seat but have been pulled up by water police for a safety check twice the last 3 times out and taking the seat off when out on the water is a pain I the arse.. I do have the storage bin but this way it's free for other things

[Sparked]

good idea I have thought of doing smilier I like the elastic strap to stop hitting steering arm I mite try that

That was my main concern, making sure it stayed clear of the steering arm and also that on case of a heavy role if the knee pad came loose the canister would stay put.. The elastic holds the canister in there nice and tight.. Going to put a few loops of that cord in the bucket aswell to hold things put..

[angelorigo]

Curious... anyone considered changing the colour on different parts on their spark? instead of having one standard colour... maybe having 2?

Without using the wraps?