Didn't know the darn VTS had to come out!

[Water4fire]

Well guys I was gonna wait until I got to the lake and tested Jerry's repitch on my stock prop, but I couldn't resist,so when my son was down for a nap I headed for the Power pipe and the RXP. Popped her cowl cherry! It was great very easy.

Then I get down to the baffle and damn thing just wont come out. My first thought was that I was Glad I am not at the lake thinking this was a 10min. job. That is what I was gonna do after first test of the repitch.
So I sit there and go damn the VTS has to come out. So I am glad that my tools has stock pilled as I have a Seadoo VTS tool for the nut.
And that is as far as I got and my son woke up. So I am stock until tonight when he goes down for the night.

Anyway finish it soon.

[Green Hulk]

The Green Hulk way is to whip out your sawzall and cut the part of the plastic resonator off that looks like a pipe (the part where the two hoses connect to) That bitch comes right out then

Screw taking the VTS off

[Water4fire]

Yea, but I will need to put back to stock to sell it.
It was OK I had all the tools. Just need to finish up when Dylan falls asleep.
He is sittin in my lap as I type.

I am gonna losen the clamp up and rotate the water box and pull the foam off of it.

[Green Hulk]

Cool deal!

[Water4fire]

Well just got back from the lake all weekend and have results on powerpipe and prop.
The pipe sounds awesome. Didn't feel any difference at all. Maybe a little
more umpth. But that could of been the prop.

The boat only turned 8050 RPMs at a best of 68.9 with me. I have seen high 69's and 1 70mph when it had the stock prop and baffle.

The ski did feel like it pull a little harder. So I am not sure if this was the pipe or prop.

it was cool and smooth a glass. I did notice this prop doesn't fit as tight in the ring as my other prop. I set them in there back to back and my prop was tight and this one would drop wright in. They are both NEW Oem props.

Any thoughts? I am gonna try my original prop now.

[Green Hulk]

send that prop back to me for a little tweaking