Results 1 to 2 of 2
  1. #1

    polaris 2000 slh 700

    Looking for answers on how to get the trim to work . Hot wired the trim motor and then the switch and both work. How can i get them to work when wired through the electric board. Thanks rich

  2. #2
    I'm addicted to Polaris PWC ghostinstallations's Avatar
    Join Date
    Aug 2011
    Rochester, New York
    I posted a reply to your other post a while back and you never responded. If you would like help please:

    -Follow up on the threads you open.
    -Include more detail (what did you "hot wire", specifically, what did you do, etc)

    By doing this, you will not only get more accurate help quicker, but you are much more likely to get a reply at all.

    Below is my previous response to your question about trim and the MFD-

    Welcome to the Hulk!

    Not totally sure what your question is. I assume you are having a problem with the trim motor?

    The trim switch is only powered when the ski is running, or the bilge button is pressed. So if it seems not to work when the ski is off, that is normal. Either start the ski or press the bilge button. If neither methodworks, check the fuse inside the electrical box. There is a glass fuse for the MFD and one for the bilge.

    As for the MFD, 99+ MFDs fail quite often because of a manufacturing change where water gets in thru the button cable from the face to the circuit board. They, typically speaking are not reparable. Most source a 95-99 unit and re-pin the connector to work.

    I would recommend using the search function on the forum, almost every question can be answered, and the plus side is, you dont have to wait! But if you cant find what you are looking for, feel free to ask!
    Below is a diagram for a 00' SLX, the trim wiring is the same. Only difference is the ignition has wiring for a third cyl. THis may assist you in your troubleshooting.

    Click image for larger version. 

Name:	2000SLX.jpg 
Views:	353 
Size:	101.2 KB 
ID:	274056

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. polaris 1999 slh 700 in limp mode???
    By mrjetskey in forum Polaris Open Discussion
    Replies: 3
    Last Post: 09-09-2010, 10:49 PM
  2. 2000 slh 700
    By barondurden in forum Polaris Open Discussion
    Replies: 8
    Last Post: 09-03-2010, 11:25 AM
  3. 2000 slh 700
    By barondurden in forum Polaris PWC Performance
    Replies: 5
    Last Post: 09-01-2010, 12:41 PM
  4. 2000 slh 700
    By barondurden in forum Polaris Open Discussion
    Replies: 3
    Last Post: 07-27-2010, 12:49 PM
  5. 2000 SLH 700 voltage problem
    By GloryHog in forum Polaris PWC Performance
    Replies: 2
    Last Post: 07-11-2008, 01:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts