Has anyone fitted a tiny tach?

[CRS]

Has anyone fitted a tiny tach? I can`t get mine to read.Got the red wire wrapped around the ignition coil but nothing.Any ideas guys??

[VFX_Artist]

as far as wiring this thread may help out :

http://www.greenhulk.net/forum/viewtopic.php?t=1337

[1FastTrespiper]

Call them or send an email. http://tinytach.com/tinytach/index.php

[bic1]

Some tachometers have a pick-up that relies on detection of the high voltage ignition pulses effectivley "through the insulation" by having a very sensitive input. On a more conventional system, it is easy to find a pick-up point. On the 4-TEC, the coil (and hi-voltage area) is in the Plug Cap itself and therefore can be more difficult to couple to effectivley. Just a thought!

[bic1]

Some tachometers have a pick-up that relies on detection of the high voltage ignition pulses effectivley "through the insulation" by having a very sensitive input. On a more conventional system, it is easy to find a pick-up point. On the 4-TEC, the coil (and hi-voltage area) is in the Plug Cap itself and therefore can be more difficult to couple to effectivley. Just a thought!

[Sunfunzoom]

Stock tac would probably be more accurate anyway.

[CRS]

Sunfunzoom,I`m not looking for accuracy,the tach on the 03 S/C only goes to 8000 and I`ve got the RR ecu so my tach just sits on 8000 and I hve no idea what I`m really revving to.

[Sunfunzoom]

Wow, did not know the 03's only went to 8000

[Lurker]

you need the red wire wrapped around a spark plug wire.

[HOSS]

bingo!