Results 1 to 6 of 6
Thread: Power loss
-
01-20-2012, 12:11 AM #1
- Join Date
- Oct 2009
- Posts
- 13
Power loss
Hi everyone,
I have just rebuilt my 2005 RXT engine after a supercharger failure which smashed my engine to bits, took it out on the lake yesterday to start running it in again but the revs keep jumping from 3000 to about 5000rpm when the throttle is pressed in about half way then it clears and ski runs normal for about 5mins then it happens again, also im getting a check engine warning after about 5mins then ski only revs to 5000rpm no more when the ski failed that message showed on the clocks do I have to take it to a dealer to have the fault codes cleared? thanks everyone.
Jason
-
01-20-2012, 06:54 AM #2
Faults will clear when the problem is fixed. Sounds like you have issues going on. maybe overheat.
-
01-20-2012, 09:27 AM #3
- Join Date
- Oct 2009
- Posts
- 13
On lake yesterday for 5hrs no overheating, I kept a very close eye on engine temp on the clocks ran between 51 - 53.
-
01-20-2012, 09:35 AM #4
-
01-20-2012, 09:45 AM #5
- Join Date
- Oct 2009
- Posts
- 13
It just said check engine? The ski has been in the garage for 2 years only now got around to fixing it, I thought it might need a good blast to clean and clear everything?
-
01-20-2012, 04:31 PM #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help, need the experts!! 2006 RXP Power Loss
By tampa_m5 in forum Sea Doo Open DiscussionReplies: 12Last Post: 10-03-2016, 08:56 PM -
gpr 1300 power loss
By nobbyq in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 04-23-2008, 04:14 PM -
Help with diagnosing power loss in 3D
By Jas in forum 2-Stroke PerformanceReplies: 15Last Post: 12-05-2007, 10:33 PM -
Power loss
By rfjr23 in forum Polaris Open DiscussionReplies: 11Last Post: 08-12-2007, 01:22 AM -
Power loss
By mrbtd in forum Yamaha PWC Performance (2-stroke)Replies: 16Last Post: 04-28-2007, 10:35 AM
Just picked up a 19 rxtx 300 and would like to have the shop manual to go...
2019 shop manual