Results 1 to 6 of 6
Thread: R & D R1 question
-
05-14-2011, 02:37 PM #1
- Join Date
- Oct 2010
- Posts
- 268
- +1
- 2
R & D R1 question
2010 FXSHO bone stock, what could i expect to get out of it with jim's plate,riva grate,pump seal kit and R1 flash? thinking maybe water box and rear exhaust to maybe....
-
05-14-2011, 02:47 PM #2
I think the beat thing is RIVA stage 1 minus prop intake grate and ride plate plus R1 should be what you're looking for in that area. Go with Jims plate and R&D intake grate and witha all these mods you should be around 75 MPH with some good acceleration. And a BOV is also optional but I really recommend it.
-
05-14-2011, 04:23 PM #3
- Join Date
- Oct 2010
- Posts
- 268
- +1
- 2
should i get something to check a/f ratios?
-
05-14-2011, 04:28 PM #4
With your setup. No. That's a very mild setup. There should be more than enough fuel in the R1 for your setup. But monitoring AFR's is always a good thing and if you want to tune your setup to the max I suggest you start with the LC-1.
-
05-14-2011, 04:43 PM #5
- Join Date
- Oct 2010
- Posts
- 268
- +1
- 2
thank for the help, holding off to see if any better clutch fixes are coming to upgrade wheel. Might go with a C5 intercooler and prop next year oh yea and up it to a R3. Then i think i will get the powershot thats about to come out. will r & d set the R3 at 8400 max for me? stock motor dont want to get that crazy yet.
-
05-14-2011, 04:55 PM #6
Yes you can custom set boost and RPM limit. But the stock motor with a valve train and good tune can do 8700 RPMs safely.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Considering a R1 and questions
By mikeFZR in forum Yamaha PWC Performance (4-stroke)Replies: 23Last Post: 01-28-2011, 01:13 AM -
C1 and R1/R2 RPMs/Speed Question
By poof100 in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 08-14-2010, 05:14 PM -
158 Thermostat question...
By rx4pain in forum 4-Tec PerformanceReplies: 34Last Post: 11-21-2008, 10:36 PM -
Hey U Stereo NUTS!!! Question about Amp.
By Water4fire in forum Sea Doo Open DiscussionReplies: 13Last Post: 06-25-2007, 12:00 AM -
Max Amps pulled from Batt question!!!
By Totallyblown in forum 4-Tec PerformanceReplies: 47Last Post: 04-03-2006, 08:35 PM
I loosened the ride plate bolts and it made enough clearance to slide out...
FX HO Impeller Project &...