Results 1 to 10 of 15
-
04-03-2011, 10:50 AM #1
How to check the Exhaust Pipe orifice on the Domestics motors
I made a video of how to check the water feed fitting for the lower half of the Domestic exhaust pipes. A video helps sometimes. I get fair share of PM's asking about the process and this may help.
In the beginning where I say that the upper half of the pipe is watercooled and the lower half is not, I should have said that the upper half is water jacketed and cooled and the lower half only gets some cooling from the upper half, without being jacketed, but I'm no Charlie Sheen. (don't always get my lines right and hit my marks!!!)
Anyhow, if I made any mistakes, feel free to comment. If it seems helpful, I'll leave it up. If not, I'll just yank it.
Thanks.
-
04-03-2011, 11:35 AM #2
- Join Date
- Jul 2007
- Location
- near Toronto, Canadia
- Posts
- 47,503
- +1
- 2,856
I like it.
-
04-03-2011, 11:41 AM #3
-
04-03-2011, 02:52 PM #4
- Join Date
- Oct 2006
- Location
- Cleveland OH
- Posts
- 18,481
- +1
- 115
I like that better than a video where you "yank it"
PS: All Fuji owners, you have the exact same set up on your exhaust pipe from all 94 and newer
-
04-10-2011, 01:32 PM #5
- Join Date
- Aug 2006
- Location
- Pittsfield, MA
- Posts
- 3,352
- +1
- 26
Nice job!
-
04-10-2011, 10:56 PM #6
- Join Date
- Jan 2007
- Location
- Houston, TX
- Posts
- 156
- +1
- 1
Thanks for the qreat video and explanation.
-
04-11-2011, 01:36 PM #7
So I've got a 95 SLX780, do I not have a water outlet to let me know the motor is cooling, or does it just dump out the exhaust... I looked and looked and couldn't find anything... The 785 Pro I have has three pissers, which I know are for the pipes, but the SLX has me puzzled...
-
04-11-2011, 03:00 PM #8
main water outlet is in the pump cavity.
-
04-11-2011, 05:07 PM #9
-
04-11-2011, 07:06 PM #10
So there's no way to tell if everything is getting water correctly? Can I run water through the hose you are talking about, back throught the engine?
I gotta jack with the throttle adjustment some more, it sticks...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What compression should I look for ? and how to check the oil level
By RXP rider in forum 4-Tec PerformanceReplies: 0Last Post: 03-22-2011, 12:22 PM -
How to remove the Servo motor on a 1300r
By slydogge in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 07-20-2010, 03:06 PM -
How to check which cam&pist are on ultra?
By danieletrono in forum Kawasaki PWC Performance (4-stroke)Replies: 24Last Post: 11-10-2009, 12:18 PM -
How to check the deck on the block
By Sirhc7897 in forum 4-Tec PerformanceReplies: 8Last Post: 07-28-2009, 10:37 PM -
How to check the stator
By charley in forum Polaris Open DiscussionReplies: 7Last Post: 07-13-2008, 09:12 PM
I loosened the ride plate bolts and it made enough clearance to slide out...
FX HO Impeller Project &...