Results 1 to 8 of 8
Thread: Pump ?
-
03-15-2011, 08:50 PM #1
Pump ?
So I went to start my MSX 150 and noticed it was having a hard time turning over and it was making a loud grinding sound. I pulled the pump and noticed the impeller is touching on the housing. My question is how do I get this thing apart? The wear ring if thats what it is called seemed to be stuck to it. Any idea's on how to get this thing apart and fixed? Any help would be great, Thanks
-
03-15-2011, 09:20 PM #2
Small rubber hammer with med size screw driver. Place the screw driver between the stator and extention.
-
03-15-2011, 09:38 PM #3
- Join Date
- Jul 2007
- Location
- near Toronto, Canada
- Posts
- 46,999
- +1
- 2,783
Have a look here;
http://www.greenhulk.net/forums/show...=1#post1439184
-
03-15-2011, 10:50 PM #4
Ok so I finally got the cover extension off. Used alittle heat and a hammer lol. Thanks for the tips everyone. So take a look at the pic's. Wonder if someone or something got sucked up in the impeller. Look at the wavey part of the housing. What do you guys think. Also should I order a housing and a new impeller? Impeller seems ok just alittle ruff on the edges and it doesn't seem to be bent.
-
03-16-2011, 01:55 AM #5
- Join Date
- Jul 2007
- Location
- near Toronto, Canada
- Posts
- 46,999
- +1
- 2,783
I think a new extension/wear ring is only $55
-
03-16-2011, 06:51 AM #6
Just go with a new all stainless wear ring and this will never happen again. chances are the impeller will be with in spec, only way to find out is fit new wear ring and measure.
-
03-16-2011, 01:49 PM #7
-
03-19-2011, 04:47 PM #8
5134562 is the part # for the all S/S wear ring best price is parts pitstop @ $134.11
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RXP Bilge Pump install
By Vern in forum 4-Tec PerformanceReplies: 14Last Post: 08-27-2014, 10:04 AM -
Skat-trak pump mod
By nitro rxp in forum 4-Tec PerformanceReplies: 6Last Post: 06-04-2005, 09:00 PM -
PUMP MOD
By peteshauling in forum 4-Tec PerformanceReplies: 20Last Post: 06-01-2005, 10:08 AM -
New Magnum pumps from Skat Trak
By Green Hulk in forum 4-Tec PerformanceReplies: 34Last Post: 05-12-2005, 08:56 PM -
PUMP WEDGE
By RXPNJ in forum 4-Tec PerformanceReplies: 8Last Post: 05-10-2005, 09:47 AM
A word of caution here, the 2010 RXT-X had two different PTO housings! The...
Turbo Project with low boost 18-19...