Results 1 to 5 of 5
Thread: What should I do next???
-
03-15-2011, 08:45 PM #1
What should I do next???
My current mods on my 2008 rxp-x are the following....
Riva i/c relocation
tdr waterbox with riva thru hull
15/22 prop
Pro series opas block offs
worx intake grate
reverse bucket trim
riva s/c washers and mcmaster spring washers
My question is I have a riva air intake but was thinking of upgrading to a 4". I have a basically unlimited supply of 4" kanaflex at work so that is no problem just need the adapter and filter. What filter are you guys using? I wondering would a pump wedge be a worth while mod? What do you guys think??
-
03-15-2011, 08:55 PM #2
I would definitely go with the 4 Inch intake. You can get a Spectre filter at your local Discount auto parts for under $30 and you can go to home Depot/lowes and get a small piece of 4" PVC to connect them together, all you would need would be the adapter from the online store and you got yourself a 4" intake!
Aside from that i would go with the Riva rideplate next instead of the wedge.
-
03-15-2011, 09:04 PM #3
Definitely go with the 4" with kanaflex. You can get the Spectre, but it has a gauze filter element and if it gets wet will clog up and will not flow much air. You're better off with this filter
http://www.4-tecperformance.com/inde...oducts_id=1043
Join your Kanaflex to the filter with a small piece of 4" pvc
and then use this coupler at the supercharger
http://www.4-tecperformance.com/inde...roducts_id=641
I would also do the riva intake manifold upgrade
I have all in stock ready to ship!
-
03-16-2011, 05:25 AM #4
[QUOTE=Green Hulk;1650379]Definitely go with the 4" with kanaflex. You can get the Spectre, but it has a gauze filter element and if it gets wet will clog up and will not flow much air.
The Spectre filter I got in my Fizzle kit looks like it just a fine SS mesh. Is that not correct?
-
03-16-2011, 07:55 AM #5
What do you guys do to hook up your pcv or topps valve when you put the 4" intake on? Do you have to put a catch can on? The oil kinda keeps everything in the s/c coated with oil. Seems like it kinda helps me since I ride in 99% salt water.
I was looking at that filter in the kawasaki section and was wondering why not use that. Question answered!! Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
What should I do next to my Fzr performance?
By CGFZR in forum Yamaha Open DiscussionReplies: 3Last Post: 07-15-2015, 03:44 PM -
2007 RXT. What should I do next?
By mksmi in forum 4-Tec PerformanceReplies: 17Last Post: 04-19-2015, 03:49 PM -
Speed gurus, what should I do next? HELP
By jwaked in forum Yamaha PWC Performance (4-stroke)Replies: 23Last Post: 11-13-2014, 08:41 AM -
What should i do next to my 2012 RXP-X 260 Please ?
By waz480 in forum 4-Tec PerformanceReplies: 77Last Post: 07-15-2014, 04:19 PM -
what upgrades should i do next for my rxp
By mr_magookw in forum 4-Tec PerformanceReplies: 1Last Post: 02-25-2008, 09:48 AM
I feel good that I have the idle fixed and that part 29 showed up and I...
RXT tops out at 7600rpm