Results 1 to 3 of 3
Thread: 07 RXT hull flooding
-
03-13-2011, 09:58 AM #1
- Join Date
- Jun 2007
- Location
- South of Boston MA
- Posts
- 297
- +1
- 3
07 RXT hull flooding
I had posted this issue a while back and never got to the bottom of it.
My buddy's 07 RXT's hull flooded while riding a few times, the dealer tested the carbon seal and hull, and changed out the drain plugs never finding the real issue, it happened again.
I just read a post on another forum about an undersize oring between the pump body and nozzle forcing water back through the scupper, which I assume are the drains.
We installed a pump wedge before this issue started, sealed with silicone, could this be the issue?
-
03-13-2011, 10:11 AM #2
Check the elbows for the auto bilge siphon they have a small air hole in the side that acts like a vacuum breaker also make sure the elbows are secured up high in the hull.
-
03-13-2011, 10:16 AM #3
- Join Date
- Jun 2007
- Location
- South of Boston MA
- Posts
- 297
- +1
- 3
Holes are clear and elbows are mounted up high.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
07 RXT water in hull
By gbest in forum Sea Doo Open DiscussionReplies: 7Last Post: 04-21-2020, 07:17 PM -
WTB - Parts 07 RXT hull extension block offs and rear exhaust tip or complete setup + other bits
By Turbo Retro in forum Sea Doo ClassifiedsReplies: 3Last Post: 03-06-2014, 08:24 AM -
WTB: 05-07 RXT or GTX Hull only
By STSPERFORMANCE in forum Sea Doo ClassifiedsReplies: 2Last Post: 10-06-2009, 11:32 PM -
WTT: 06 RXP Hull for 07+ RXT Hull
By suck my wake in forum Sea Doo ClassifiedsReplies: 2Last Post: 09-13-2009, 08:06 AM -
WTB: 06' or 07' RXT or GTX HULL ONLY
By STSPERFORMANCE in forum Sea Doo ClassifiedsReplies: 2Last Post: 09-07-2009, 05:14 PM
As an update, I must have been in the sun and unable to read the display,...
Purchase of 2003 MSX 140