Add VTS to RXT 2007

[churras]

Hi
i´m starting the job on add VTS to my rxt 2007,
does anyone has the electrical wiring diagram to add the VTS on my OEM wiring harness,but reading the vts position on my cluster
thanks for your help
Hugo

[Water4fire]

Once you add the wireing you can just have your display and ecu programed for it. I would buy a RXP or t-x p-x harness you can get them dirt cheap now, but I also had mine wired, so it can be done.
You will need to just cut down a stock VTS rod and remove a inch or 2 in the middle of it and re connect it together with a screw in the middle and epoxy. The RXT pump shoe is different. You need to drill out the shoe for the VTS also. You can see were it should be but is not drilled out. I did this with a multi size bit. All in all it is easy.

[churras]

do you have the vts displyed on your cluster?or do you have a trim gauge
i had made the rxtx pump shoe conversion so i think i will keep the original rod length

[Water4fire]

YOu use your original display and they program it to use VTS with the Buds system or new candoo.

[churras]

i´m thinking on add wires to my 2007 harness, the most dificult for me is about the two brown wires, i think this ones are for the VTS display
thanks

[mrbtd]

I have the harness u need $90 plus shipping. It is brand new never used

[Gus13letter]

This out to help ya out!
http://www.greenhulk.net/forums/show...&highlight=vts

[churras]

I have the harness u need $90 plus shipping. It is brand new never used

wich harness you are speaking about, main harness or stearing harness
thx for your help

[mrbtd]

wich harness you are speaking about, main harness or stearing harness
thx for your help

Steering with the VTS buttons its all one piece.

[sHALlow]

on a scale of 1-10 how would you rate this mod. would expect the same results as if i were riding an rxp? is it worth it?