Results 1 to 2 of 2
  1. #1

    limp mode vs over of fuel

    my engine sometimes can't go highspeed it blubbers... how would i identify if its in limp mode or over of fuel??? since my mfd is not working..

  2. #2
    jcc011185's Avatar
    Join Date
    Sep 2006
    Kannapolis NC (north of Charlotte)
    pull the grey wire in the CDI (the one coming from the sealed box), or if you can't figure out which, you can pull all three and tape them up together... while your in there check the 1/4 amp 1 and 1/4" fuse, cuz if it's blown, if you replace it with one from radio shack, your MFD most likely will work fine.

    Pulling the grey wire disables limp mode so you can see if that's it, most likely it is... but if you can fix your MFD, you'll be able to tell better....


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. how to identify if it bogs lack of fuel or over fuel?
    By andy95'slx780 in forum Polaris Open Discussion
    Replies: 4
    Last Post: 04-18-2011, 10:50 PM
  2. Replies: 5
    Last Post: 08-22-2010, 09:27 AM
  3. 03 freedom 700 over heat light & limp mode
    By fordpower in forum Polaris Open Discussion
    Replies: 3
    Last Post: 06-02-2010, 02:08 PM
  4. Limp Mode - MFD does not display fuel level
    By sgoodman75056 in forum Polaris How To & FAQs
    Replies: 2
    Last Post: 07-04-2009, 03:58 PM
  5. can you by-pass the fuel guage for limp mode???
    By paramuir in forum Polaris Open Discussion
    Replies: 6
    Last Post: 07-09-2008, 04:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts