Results 1 to 3 of 3
  1. #1

    sealion??? =) about the fuel sender

    i forgot what are the number of the fuel sending unit when used with a multimeter with the tank empty??? and full??? and i would also like to try check my terminals of the battery if it is charging the battery would i do that??? im gonna use a multimeter dc and check the volt?? when running, should the volt increase???or an amp meter ???thanx

  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Campbell, Ca.
    33 ohms and 240 ohms

    Use a volt meter across the battery to verify voltage, roughly 13+ at idle and more when accelerating, it should go no more than the 14 volt neighborhood.

  3. #3
    SeaLion's Avatar
    Join Date
    Aug 2006
    Ride Mohave To Havasu. Live In Los Angeles.
    What Al said since I don't have my manual to tell you any different

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help unplugging connector at the fuel sender
    By olysan in forum Polaris Projects
    Replies: 3
    Last Post: 10-24-2016, 09:32 PM
  2. How do you get the Fuel sender out - Virage TX?
    By skiversinc in forum Polaris Open Discussion
    Replies: 0
    Last Post: 08-30-2011, 12:24 PM
  3. how to install the float on the fuel sender
    By andy95'slx780 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 10-05-2010, 06:29 AM
  4. tank is leaking thru the fuel sender hole =(
    By andy95'slx780 in forum Polaris Open Discussion
    Replies: 5
    Last Post: 09-01-2010, 09:37 PM
  5. Trouble shooting the fuel sender
    By 97GPSLEEPER in forum Yamaha Old School Skis
    Replies: 10
    Last Post: 04-16-2007, 07:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts