new rr ecu 2 continue

[naorav]

i came back. i found the 2 resistors on the wire of the knock sensor and i have some picture .

[naorav]

you have to open the black rubber

[naorav]

after you open the rubber you will see 2 resistors you have to cut them

[naorav]

you have to open all the rubber becuse at the first you will see the 1 risistor and then the 2 second you have to cut them out and put two new wire and conect them to original conector.
i go to the sea on monday so i can chk the changes. now i dont have any problem i hope this will solved the problem.

[naorav]

i whant to say thenks to my good freind eyal izhari the best thecnik of seadoo in harel racing israel that help me to solved the problem

[guy d]

i whant to say thenks to my good freind http://<a href="http://eyal izhari t...rel racing</a>http://<a href="http://israel" targe...nk">israel</a> that help me to solved the problem

yes naor me too


like them start my xp in 2 min' after the problem thet we were heve


i wont to go with your ski to fill how it run's

guy