Results 1 to 10 of 11
Thread: Hulk! Re: Aftermarket parts!
-
08-04-2005, 03:18 PM #1
Hulk! Re: Aftermarket parts!
I have a few questions! I would like to get my Rxp over 72! I wanted to know whats the best things to change on it first. These are some things I have in Mind.
1. Riva Power Pipe
2. Riva Pro NOPAS
3. Should I just Buy the Riva Stage 1 or
4. PPG Level 1 ? Which is Better for the Money.
5. Also what sponsons should I buy Work or Riva?
Also what is the resonated and non resonated Power pipe from PPG?
Next Can you all give me the pros and cons of the level 1 kits. Also what should I do to improve the handling cause it takes some work to make it spin out.
6. What Intake grate is the Best?
A little help from all you hulk members would be greatly appreciated because I dont want to buy stuff to find it doesnt work. I also know Jerry you are the Man that knows what works and what doesnt work!
-
08-04-2005, 03:26 PM #2
72... must have a friend that is going 72.
To spin out you have to turn slightly one way at a quarter throttle then turn it the other way and gun it. Basically rock it.
Get the riva no opas and the riva intake. I'd get the thru hull exhaust from riva and make your own intake system
not sure about the wedge.... some like it , some don't
Then just do the stage II from riva.
then do your homework and read from rxpperformance.com about all the "anal" mods... hehe
-
08-04-2005, 03:33 PM #3
- Join Date
- May 2005
- Location
- St. Louis MO
- Posts
- 441
Riva has the best sponsons, by the way to purchase these parts at a discount talk to richard! "Way2fast"
-
08-04-2005, 03:46 PM #4
cool thanks fo r the Info! ONe other thing what are people using as an intake? When making it your own? Can it be made out of a stainless pipe Like the ones used on a Hoda car intake?
-
08-04-2005, 03:50 PM #5
- Join Date
- May 2005
- Location
- St. Louis MO
- Posts
- 441
Well alot of them are buying the riva intake and adding on to it or modifying it! For example tak a look at hulk's intake its a riva itake with and extended tube added on to get more air!
-
08-04-2005, 04:26 PM #6
OPAS Removed
Riva Grate
Stock Impros pitched impeller (12/19.5) or PPG pitched Solas (better acceration)
Riva sponsons
Vortech SC Impeller
Riva Power Filter
PPG power pipe
Fill in rideplate holes with JB Weld and true grate to rideplate.
This should get you 72+
-
08-04-2005, 04:34 PM #7
Does Riva make more than one grate for this? Also The PPG pipe is that resonated or non?
-
08-04-2005, 07:39 PM #8
Riva only makes one grate for the RXP. I would go with the non resonated pipe.
-
08-04-2005, 08:15 PM #9
- Join Date
- Jul 2005
- Location
- Wisconsin
- Posts
- 128
Works sponsons
Intercooler Riva or RR
I'd leave the prop untill yoou find what RPM its at
SS wear ring
2 deg wedge (I hear with hook in hull)
Riva grate doesnt work if you take the hook out.
SC impellar
-
08-04-2005, 09:07 PM #10
- Join Date
- Apr 2005
- Location
- San Diego
- Posts
- 135
Hey Angel where are you located at? So Cal? Do you talk to Surf Jumper at Sea-doo.net?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Place to buy aftermarket parts for a 750SX
By beegle55 in forum Kawasaki Open DiscussionReplies: 3Last Post: 10-14-2008, 08:38 PM -
wtb polaris 785 pro aftermarket parts
By DetroitBullet in forum Polaris Open DiscussionReplies: 2Last Post: 09-28-2007, 09:33 AM -
aftermarket parts
By 06kingranch in forum Yamaha Open DiscussionReplies: 1Last Post: 09-28-2007, 01:25 AM -
Aftermarket parts??
By Paulz01 in forum Sea Doo Open DiscussionReplies: 1Last Post: 08-12-2007, 11:33 PM -
WTB: 97 GP1200 stock and aftermarket parts
By 2lick in forum Yamaha Old School SkisReplies: 3Last Post: 02-20-2007, 09:09 PM
Yepp. Youtube have told me that
New ti me stx with damaged hull