Missing piece on steering nozzle ?!?

[Kinchyle]

Limited was telling me about a piece to turn 180 so I looked at my steering nozzle and couldn't find it. It looks like I have something missing. There is a hole in the front (small) part of the steering nozzle. It looks like a bolt was there and it has yellow locktite looking stuff left.

What goes there !?!? I'm going to call seadoo dealership to get my shiznick back!

[05Limited]

Kinchyle,

The part I was referring to is the elongated plastic bushing that the lower steering nozzle pivot bolt goes through. It allows the nozzle to point straight back or tilt up somewhat, depending on which way it is installed.

Jeff

[Kinchyle]

I'll take pictures of my steering nozzle.. I think I'm missing it.
Anyone have pictures of what a steering nozzle looks like

[Thomas]

it's number 33 in this diagram.

http://69.60.104.141/cgi-bin/mivavm?...de=SE04GTX4SPU


btw, this is only on the GTX/RXT, not the RXP

[05Limited]

Thanks Thomas.

Like they say "A picture is worth..." I was having a hard time describing it.

Jeff

[Kinchyle]

Here is my steering nozzle.
Does anyone know what is missing on the front lip. There is a bolt hole with left over yellow loctite.

[jasj]

That is where the Opas used to connect.

[Kinchyle]

ohhhhh

OPAS SUCKS!!!!!!

that things has had me worried over nothing

I guess I'm going to fill with something since I don't need it.

[Thomas]

I've been tempted to just grind the opas lever boss off the steering nozzle alltogether.

[05Limited]

Thomas, that would be an "anal mod".

Jeff