slx pump support bracket

[tburn]

I saw a bracket on a 1996 sl 900 the other day that bolted to the top two bolts on the pump and then bolted to the under side of the hull above the pump. Are these available somewhere? Where I do alot of jumping I thought this might take a little stress off of the pump bolts and stress off the hull. Thanks

[beerdart]

5241880brkt,pump ext,sl


5241880
brkt,pump ext,sl
$57.10

[tburn]

Thanks now is there any used ones out there.

[xlint89]

5241880brkt,pump ext,sl


5241880
brkt,pump ext,sl
$57.10

Is that a stock Polaris number?

I thought Hot Seat was the only ones that made that.


I ended up buying the one from HS for around $70.

And then I made 4 of them. 3 of which I gave to a couple guys on here that have helped me out a while back.

[xlint89]

I saw a bracket on a 1996 sl 900 the other day that bolted to the top two bolts on the pump and then bolted to the under side of the hull above the pump. Are these available somewhere? Where I do alot of jumping I thought this might take a little stress off of the pump bolts and stress off the hull. Thanks

Not sure if the part Beerdart posted includes them or not, but the Hot Seat bracket also had 2 SS plates that went on the inside to reinforce the hull. Preventing the studs from pulling through the fiberglass/SMC.

[TxVirageTx]

the early model skis with the domestics,sl900,sl1050,and the slxh where prone to cracking around the pump area,in 99 polaris heavily reinforced that area and solved the problem

[tburn]

So its not really needed on my 2000 SLX even though I do alot of wave jumping?