Gpr gauge pod install?

[espritonsevas]

Hey guys, ok so I recieved the new/used gauge pod from treemoney(thank you for the quick transaction). I hooked all the wiring up and it seems to be working fine. My question is, how do I pop out the old one, and put int he new one? I saw/felt no way to do this, but I am sure their is b/c people have. Any direction to help me out would be fantastic guys?

[L Carlson]

Pull off one side of the cowlings! Becarefull on getting the top side off the black piece that the cowling is attatched to. Those plastic clips have a tendency of breaking! 10 mm nuts on the back of the gauge. Have fun! Lee

[L Carlson]

The clips iam pointing at is what iam talking about! Lee

[espritonsevas]

Never actually taken off the cowling, any insight on that would be great also

[L Carlson]

two allen bolts under the front lid usually black and two allen bolts on the bottom of the cowling sort of by your feet. Lee

[scittb]

Doesnt the electronic cluster just drop out from the inside the front compartment with the 2 10mm nuts and the metal cage?

[L Carlson]

Doesnt the electronic cluster just drop out from the inside the front compartment with the 2 10mm nuts and the metal cage?

wish it was that easy on a GPR! Not

[xsockguyx]

Never actually taken off the cowling, any insight on that would be great also

two allen bolts under the front lid usually black and two allen bolts on the bottom of the cowling sort of by your feet. Lee

+1 and then you just pull them off. Your gonna have to put a little muscle into it...........it almosts sounds like there gonna break but they pop off.

[N8R]

I have had 2 gauges go out and do not like to pull off the fairings so Jim and Leo said to drill (2) 1 1/4" on the back side plastic to acees the bolts then just glue a flat piece back on took me about 30 mins to change it all out and now have easy access..

[espritonsevas]

Well going to try and tackle this tomm, not excited. I want to do the drilling thing, but dont have a drill anymore so to the fairings it is.