Results 1 to 3 of 3
-
08-10-2009, 06:33 AM #1
- Join Date
- Jun 2009
- Location
- Jacksonville, FL
- Posts
- 9
Impeller rattle when flushing motor
I just bought an 08 Ultra 250X and had a question about a rattle from the impeller when flushing the motor out with a hose out of the water. Is this a normal characteristic due to the impeller being out of the water and under no load? It seems to have done this from day one, I have about 12 hours on the motor now, was just doing my first oil change and 10 hour service and thought I need to find out just in case this is not normal. Thanks, I did a search and found something on this but not in the Kawasaki section.
-
08-10-2009, 06:28 PM #2
its normal, just dont rev it too much, a couple of times to clear the water box is ok.
-
08-10-2009, 06:54 PM #3
- Join Date
- Jun 2009
- Location
- Jacksonville, FL
- Posts
- 9
Thanks for the reply.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
No water coming out when flushing!
By HKT Boy in forum Sea Doo Open DiscussionReplies: 5Last Post: 06-08-2012, 05:04 AM -
what will happen if i flush motor without it running????
By lippyat13 in forum Polaris Open DiscussionReplies: 8Last Post: 05-29-2012, 03:46 PM -
Should you replace all bolts when rebuilding motor?
By toyterrific in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 07-10-2010, 11:48 AM -
Impeller question 1390 Lowell motor
By Kahona2 in forum Yamaha PWC Performance (2-stroke)Replies: 11Last Post: 10-12-2008, 08:43 AM -
Impeller noise when flushingengine ??
By VBSPORTSTER in forum Sea Doo Sport BoatsReplies: 5Last Post: 07-27-2008, 08:31 AM
How much cargo do you have in the front storage compartment? I don't...
Another 2003 MSX 140