Search

Type: Posts; User: Ragnar

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Ahh, found it, didn't think it would be on the...

    Ahh, found it, didn't think it would be on the 1st page. My CDI is p/n 4010803

    and assuming I did things the way I planned here's how I set the timing ring

    Engine spins toward the port...
  2. Yea, it was the cdi for the high start flywheel...

    Yea, it was the cdi for the high start flywheel that came with the SBT gen3 kit. Can't seem to find the part number and I don't have the box open.

    You think if it needs more advance I should...
  3. Also just remembered I made a static timing test...

    Also just remembered I made a static timing test light (or whatever you would call it for testing when the timing event occurs unstarted) and never used it. Guess I will break that out tomorrow and...
  4. I finally got this ski legal (went through the...

    I finally got this ski legal (went through the Vermont registration process), on land it runs great for 15-30 seconds. Almost always starts on the 1st push of the button w/no choke. Looks like 1860...
  5. Took a heat gun to the plastics today ...

    Took a heat gun to the plastics today
    ...
  6. I was having a hell of a time trying to see the...

    I was having a hell of a time trying to see the running timing with a timing light, so I soldered up a hall effect tester, but I'm unsure what timing I should be looking for as I manually turn the...
  7. That makes me feel really good, I thought you...

    That makes me feel really good, I thought you guys would think I was an idiot for not hearing it when it was only running for a few seconds. It actually sounds pretty good with the seat on.

    The...
  8. Well damnit, unless these engines are really...

    Well damnit, unless these engines are really clattery I'm pretty sure I have real engine problems, what do you guys think?
    https://streamable.com/rd3s8w
  9. I got it back together, pulled a plug to check...

    I got it back together, pulled a plug to check for spark and thought I didn't have any. But just to be sure, I primed the cylinders, carb and fuel line and she started right up for 2-3 seconds...
  10. Thanks, it's a Tahiti, but it looks like the...

    Thanks, it's a Tahiti, but it looks like the Sidewinder was a identical, or nearly identical hull, I don't see any differences in the lower, and only difference I notice in the upper is some louver...
  11. I just realized you have the same ski, that red...

    I just realized you have the same ski, that red seat really looks sharp, changes the look almost completely. did you paint the kneepads, or vinyl cover them?
  12. I'm pretty sure the purple wire had a matching...

    I'm pretty sure the purple wire had a matching bullet connector
    I'm planning to get a seat cover.
    I have an old speedboat that had a beautiful custom paintjob for 30 years or so, but it's failed. ...
  13. Looks...

    Looks likehttp://greenhulk.net/forums/attachment.php?attachmentid=472584&stc=1 it has hull extensions, not sure if the ride plate is changed or modified, it sticks out about an inch past the...
  14. Thanks again guys, I cut back the stator wire...

    Thanks again guys, I cut back the stator wire sheathe some more, and decided to give her a bath, and finish up the upgrade next weekend. Didn't clean up as well as I hoped, but for what I paid,...
  15. SBT tech won't be available till 3. Pastel vs...

    SBT tech won't be available till 3. Pastel vs bright colors I think is the problem though. In this pic the bright green wire connector ends right at the edge of the pastel blueish wire. I'm pretty...
  16. I have 8 wires from the stator but none of them...

    I have 8 wires from the stator but none of them are green, only close color I consider blue. I'm sending a message to SBT with the pic to clarify whether or not those 2 wires go together.
  17. Thanks guys. I think i'm all set except for...

    Thanks guys.

    I think i'm all set except for the blue green mismatch colors between the stator and the cdi.

    I think the brown wire I was confused about is just my perspective as it's the...
  18. Sorry, a bunch of questions on wiring 1 The 2...

    Sorry, a bunch of questions on wiring

    1 The 2 black wire ring terminals (one from stator, the other from CDI) just get mounted together under the bolt next to the voltage regulator, right?
    2 I...
  19. Nice, if I think there's any chance of the wires...

    Nice, if I think there's any chance of the wires getting hit, I can make up a little sheet metal cover like that pretty easily.
  20. http://greenhulk.net/forums/attachment.php?attachm...

    http://greenhulk.net/forums/attachment.php?attachmentid=472563&stc=1
  21. Thanks again for the guidance, and believe me I...

    Thanks again for the guidance, and believe me I won't button it up until I know the stator wires aren't going to get mangled by the flywheel, I don't wanna have to tear it apart again. I just don't...
  22. Oops, missed your reply with the video. It was...

    Oops, missed your reply with the video. It was the nuts molded inside the timing ring, when I went to adjust the timing they just spun in the plastic instead of releasing the ring and I had to cut...
  23. Damn looks like my reply got eaten. It's all...

    Damn looks like my reply got eaten.

    It's all installed so you probably wouldn't see it in a photo, but basically the wires coming out of the stator are in a sheathe for about 2 inches before...
  24. Nice, got it to slide down about 1.5 inches with...

    Nice, got it to slide down about 1.5 inches with soap, I just assumed that wire bushing couldn't move before I installed it. It still sticks out a little, but there's no room to take any more slack...
  25. looking at the old stator it looks like I...

    looking at the old stator it looks like I probably need to force the rubber wire bushing down closer to the stator to get rid of the slack, but I fear breaking the wires doing that, as it takes a lot...
Results 1 to 25 of 33
Page 1 of 2 1 2