Search

Yes! and as soon as it's available the GreenHulkStore.com will have plenty in stock and I will make an announcement here on the forum.

“ Typically “ 83mm to 85mm add 100rpms and a little more speed.FX nozzles are 87mm and 150-200rpms but you dont go any faster or start slowing down a little.These are just some generalizations and...

GreenHulk PWC Performance Holiday Sale

http://greenhulk.net/forums/attachment.php?attachmentid=469159&stc=1



The Holidays are here, which means our loyal customers are looking for deals!
...

Best thing to do is get as much data as you can speed/rpm, nozzle diameter, etc and call or email Dean. He's a wiz on with these things He dialed my nozzle and pitch in great.

That would be a "no", I surely have not seen a 12/17 in practice. Then again, how many folks are (will be) running this setup? Maybe you'll pioneer something new & specific for your custom setup.
...

I think most of you get what I’m saying about the pitch-spread factors (as opposed to the overall pitch itself) …. yet let me try it again with a few pics this time …


469020

Fig 1
Forget...

The skis I have are a 2011 and a 2016 both of which have alot more drag.You could have more motor spinning a larger prop to higher rpms but if the surface tension from the hull design is higher than...

I really think the extra speed is mainly in the hull design.Unlike previous FX's the V the new one is much shallower and there are lifting strakes next to the grate which keep the rear of the ski...

Awesome results Dan! Congratulations!!

bad azz dude!!!!

congrats brother,,,, bad ass numbers!!

Have not used it myself
But you could Try a Caramel Wheel / Pinstripe remover
YouTube it to see it work on cars without removing the paint...

DanSvho, make sure u fill the voids in the transom with epoxy or resin before you reinstall. It makes for a much better seal

Transom plate nut could be 19.2 ft-lbs
Jet pump unit assy & impeller duct bolts 29.5 ft-lbs
Above based on the same fiche parts back in 2012

For silicone adhesive removal (if that is what that...

drill + wire will on slow setting, you want to scratch the paint to the new adhesive stikcs, i use 5200 and never worry about it again.

So an M8 thread chaser is whats needed right?

I used a razor blade as a scraper.

I used 4200, no issues.

I would definitely reseal the transom plate with 5200. Good info here
http://greenhulk.net/forums/showthread.php?t=117375

Ok ok yea I have a ear for lope. my fz has a little bump to it that most people would not hear.

ur cooking now...nice numbers

Time the cams with the dots on the cam and the middle cap arrows. They should look identical to the the other ones by eye. You're good.

https://www.henkel-adhesives.com/ca/en/product/pressure-sensitive-adhesives/loctite_592.html

Thick acrylic dimethacrylate ester lubricating thread sealant paste which prevents galling on pipe...

Just did a brief search and saw where my mechanic with WFO performance said he uses Loctite 592 on all bolts outside the hull.

Tape should be fine. I put some red loctite on mine.