Search

Type: Posts; User: steve45

Search: Search took 0.02 seconds.

  1. It's a 20 year old piece of rubber that takes...

    It's a 20 year old piece of rubber that takes quite a load when jumping wakes, etc. They don't last forever.

    Be sure to bolt in the engine, then the driveshaft bearing. Put sealant on the back...
  2. Some people cut the cable, but I don't like that....

    Some people cut the cable, but I don't like that.

    I made a new angle bracket out of stainless. I moved it 3/4", which makes down become neutral.
  3. When you get it all sorted out, you'll have fun...

    When you get it all sorted out, you'll have fun with it. Especially if you modify the trim to give more up.
  4. Several things you MUST do: Remove the display...

    Several things you MUST do:

    Remove the display and seal the rubber plug on the back with 3M 5200 Fast Cure. Otherwise, when you flip the 'Ski, you'll get water in the display and ruin it.
    ...
  5. What model of 'Ski is it?

    What model of 'Ski is it?
  6. Nope, it won't work. You might look at the...

    Nope, it won't work.

    You might look at the aftermarket driveshaft holders from Rhaas.
Results 1 to 6 of 6