Search

Unclear why this post was not refuted earlier. My bad, I suppose.

Lakeside does excellent EMM repair work. Darrin has developed multiple Ficht EMM specific repair methods, researched and refined...

I will mention that with stainless steel bolts and screws, especially the medium to smaller sizes, a power impact tool can twist the bolt head or snap the nut clean off using impact power.

Or...

I used an independent eye practitioner who sent the frames away with the lens order.

If I was to do it again I would probably let SeaSpec do the prescription lens directly.

The tricky part...

Agree.

You can work around the shallow ramp angle by using a trailer with an extended length tongue. Just make sure the trailer is stout construction to handle the strain of an extra long tongue. ...

Send a Private Message to Green Hulk requesting the name change.

include your email address.

There has been a pattern recently of new members with very few or zero posts, sending a private message to someone looking for a part, pointing to an email address.

These are scam messages, they...

Will you planning further upgrades as time goes on?

That is one advantage to the Riva MaptunerX system, you can switch and upgrade tunes as often as you like. Compare tunes, try with different...

Be careful about which model and year those ride plate reviews and comments were for. Yamaha changed the factory ride plate on GP1800 with the GP1800R update, which much improved the handling.

The...

Riva sometimes does not keep the web list of tunes updated. The official tune list is seen from within the MaptunerX app on your computer, once you have purchased the MaptunerX tune licence and...

http://greenhulk.net/forums/attachment.php?attachmentid=469688&stc=1

When rattling along over textured water a glancing strike of a chunk of wood or debris might not be noticed.

The rougher the water at speed the more possible it is to not notice a hull strike.
...

The Super Lube Spindle design and the EZ-Lube design are also compatible with Bearing Buddy, IIRC.

Only the Sure-Lube design with the grease exit ‘weep hole’ on the axle spindle back side does not...

How many years of use did the original bearings provide?

Periodic bearing and seal replacement is to be expected. They are wear items and salt water use is going to eventually degrade the metals,...

Why is that ideal?

Most of us float the hull onto the trailer are much as possible given the water conditions and the ramp/beach slope. Hauling the trailer bodily up onto dry rollers with the...

You can add your location to your profile. Click on My Profile, top right corner of the web site.

The St. Lawrence river is within a day’s driving of your location. Excellent scenery, lots of...

http://greenhulk.net/forums/attachment.php?attachmentid=469369&stc=1

When reinstalling, pay attention to the sealing in the red circled areas.

Sometimes there are small air gaps between the...

The Yamaha SVHO engine has the same maintenance schedule as the HO engine. Same oil and filter change intervals, with the same oil. The rest of the GP1800 hull and running gear also the same for...

http://greenhulk.net/forums/attachment.php?attachmentid=466612&d=1598987537[/URL][IMG]http://greenhulk.net/forums/blob:http://greenhulk.net/52321317-c27e-4fcf-a66a-0d34adf51a39

This is what I use...

It is possible to carry extra fuel and have it automatically transferred to the main fuel tank as you ride. Typically this is done using a marine/outboard fuel tank with a fuel transfer hose...

You can create a service tag 🏷 that is unique to you, attach that to the engine. Maybe even put a service number on the tag so you can check your work records, should a tagged machine later return to...

Welcome to Greenhulk.

Your replies to posts from others are excellent.

If you would be interested in collecting your thoughts, experience and advice into a set of posts and threads, I expect...

Best hose clamps?

Oetiker gapless/stepless ear clamps.

Must be sized to fit the OD of the installed fuel hose.

For Ficht EMM Repairs, contact Lakeside Tech


http://www.greenhulk.net/forums/showthread.php?t=268057&p=2917494&viewfull=1#post2917494

Upon further investigation apparently I should not be using this model charger.

It was rather cool today, air temp about 8C.

I checked the float voltage being provided by my Deltran Waterproof...

Why would you post this on a watercraft forum?

I suspect a Bot.