Search

So I think I found where some water was coming in. The rear access doors have little screw things that keep the pressure on the door to create a seal. One was missing on the one side and water could...

So I bought the ski used this spring. Have always had a little water in after riding but chalked it up to spray, etc. Maybe an inch that would settle up front between gas tank and engine.

Last...

Holy crap I can't imagine paying that kind of money for wear ring and oil change.

Best answer is keep an eye out for larger debris and do your best to avoid it. It's the best you can do.

And...

Just finished pulling IBR and pump and reinstalling to do an impeller swap. The IBR override allows you to "manually" raise the IBR gate out of the way the same way it does when you hit the throttle...

They sell a "DIY" kit here in this websites store. It would fit pretty much any ski I assume. It's just a SC adapter that ups it from 3 to 4 inches and Kanaflex hose with a filter, essentially.
...

I love spending my money on upgrades as much as the next guy but damn this is even hard for me to justify.

Don't get me wrong though, I'm still interested!! :):facepalm:

Checked all the hoses from SC to Throttle Body? I had a boost leak that would peak me around 7500 and it was because when I installed the Fizzle I must have not tightened the clamp on TB and it...

Just got back from water. Problem fixed. RPMs went from 8300 ish to smashing limiter at 8550 and no air intake temp codes. Fizzle for the win!

It's very probably user error here!!! Haha

Edit - and by very probably I mean absolutely :facepalm::lol:

So I figured out where the leak was. Clamp on the silicone coupler where the steel pipe from Intercooler comes to throttle body had come loose and was barely hanging on for dear life. Rest of clamps...

I used the clamps that came with the kit. Worm style for sure. Should I swap them out?

Also, when installing the riva block off should I have used one of the gaskets from the stock IC? I tried to...

Alright guys. So month or so ago I put an x charger and tune on a 2010 Wake Pro 215. Everything else stocl (had Deka 48 lb injectors). In the handful of times I have ran it since I was around 8300...

I used Kroil penetrating oil on mine when I changed it the first time after I bought it used this spring. I had it already as I use it building and fixing firearms. Put a little on the bolt head and...

Hello all!

I have a 2010 Wake Pro 215. I have done the X charger, ecu tune for x charger and am waiting on Fizzle F1000 kit which will be installed upon arrival. Ski already had 48 lb injectors.
...

...

So pulled hoses, removed intercooler and inspected and nothing seems off. Water flows fine through hoses and through intercooler...any other advice?

Correct I'm aware of that and am going to check that shortly. Simply wondering since the code is referring to intake temp sensor reading higher than normal temps if an engine overheat would...

Stupid question but I replaced the coolant recently and flushed with water. I refilled and checked level but never ran it and checked levels after ��♂️.

Essentially I just looked and level was low...

So as a background. Installed X charger, 48 lb injectors and had a tune done on a 2010 Wake Pro 215. Had it out on Lake Michigan for first extended use since the works been done. It was rough so...

So heres what I have going on. 2010 Wake Pro 215 and just put an x charger in and jad ECU reflashed accordingly. First ride, although brief due to time constraints, I felt as though I was hitting...

I thought so too! Took valve off and put sensor back in place and just fired it up! Engine light off! Thanks again!!

I didn't notice anything specifically being off. Got to 71 mph and roughly 8500 rpm. It was the first run and it was only for a few minutes so wasn't sure what to expect. it seemed to run fine other...

I took it off for better access to the top bolt that is rear facing. I probably didn't need to remove some stuff but it was my first shot at it and started removing stuff because I figured I needed...

Also, would this issue limit performance in any way? I am certainly going to fix it but was just curious because it seemed to run fine. However this was the first time I've ran it since X charger...

Absolutely will do! Thanks again