Search

And a 300 flywheel

I stand corrected. Seems every oem parts site I could find had different #'s for
the 300's vs. any of the other 1630's. Turns out they're showing part #'s for the
1500's. Guess they need to...

Just to note. Crankshaft, counter balance shaft and flywheel on 300's have different part #'s than the other 1630 engines. Not sure what difference is but might not work for a 300 conversion to a...

2017 manual says 11.5/16 150mm

A service manual would probably have those specs. Not sure how much it would help with aftermarket props due to differing root angles and such. GTI 90 stock prop is probably gonna get u all can...

Hasn't been any free shipping for 2+ yrs��

Have used the Maptuner logger for a while. Worked fine until the PLX box got wet. Too many wires with that setup imo. Got the V-tech logger, less wires to deal with but had issues getting it to work....

That doesn't happen overnight. Had to be some warning signs you missed.

It should be fine to leave in as long as it doesn't hit something and break off.
I believe that ski has trim tabs sticking out that would help protect it.
Shouldn't affect the water flow.

Less than 4 hrs. Unused prop cone. Also included brand new WSM
wear ring. $220 shipped in...

Hard to tell w/o some pics. What I really want to know is how people keep finding 14
year old skis with only 45hrs???

Am I the only one that gets the jacky wacky vibe???

I hear ya bro...he's a douche

Had the same issue as the OP. Brush broke off inside the motor. Bought the same 775 motor from amazon https://www.amazon.com/gp/product/B08662QSZL as andrewsilver linked to me. Have run for 3 hrs or...

Screws are 250001007 and do go through the hull

Went with an Eastside stage 2 regrind. Added 400 or so rpm. Switched to a stage 3
and got another 100-150.

Start with the stage 1. As you change parts you will need to log and send that info to
Jesus@Riva. He will adjust your tune as needed. Cam change would be a good idea.
Those 230's are turds without...

Worx has one. WR04039.
Can get it here in the store

Not sure it has to do with this logger. Using the plx I also get a 2 mph lower speed
than what shows on the dash

I would check battery connections first

Yeah mine seemed to work in my garage but not on the water...went back to using the PLX and all its freaking wires. Hopefully we'll have an update by spring.

Yikes.....not good. How many hrs?

https://www.amazon.com/gp/product/B00027GXMK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

works fine. $20

Go to Scott's post #42. Second attachment are the instructions

Aftermarket kits available with or without the shaft