Search

Type: Posts; User: Green Hulk

Search: Search took 0.09 seconds.

  1. Sticky: No difference in power.

    No difference in power.
  2. Sticky: The update was done to make the knock sensor more...

    The update was done to make the knock sensor more sensitive.

    If you have the piggyback harness in place the update was done ;)
  3. Sticky: The 05's have the resistor built into the wire...

    The 05's have the resistor built into the wire harness already and you have to cut it out when using a Rotax Racing ECU. Its the bulge in the stock wire harness leading to the knock sensor...
  4. Sticky: *** For Rotax Racing ECU equipped skis *** If...

    *** For Rotax Racing ECU equipped skis ***

    If you have an 04 RXP you must have the knock sensor piggy back harness removed.

    For 05 skis you must manually remove the resistor that was made...
  5. Sticky: Also, once you have your new racing ECU installed...

    Also, once you have your new racing ECU installed you will notice you dont get a beep when installing your lanyard. This is normal. You will also see "Maint" flash on the screen for five seconds...
  6. Sticky: How To: Install RR ECU after the knock sensor update 04 RXP

    I've seen this cause alot of grief to people installing new Rotax Racing ECU's in their skis so I figured i'd make this a sticky.

    When installing the Rotax Racing ECU after you have had the knock...
Results 1 to 6 of 6