Search

That is very sound-advice - many thanks !! :cheers2:
The importance of optical-center is indeed very important, aka distance between pupils I have once had miss the mark, and as a result I felt the...

:-k According to the GP18000 2021 parts fiche on the Yamaha Partshouse site ... yes, it looks exactly the same a previous years.



Yes, the OEM Zerk fitting on the housing works fine - it's...

Understanding you are in Canada... but I wanted to ask how did you go about finding a local lens-crafter to retrofit your SeaSpecs frames? FWIW, I am in Florida, considering on-water prescription...

Try "Nada" guides .... although like KBB, can be off somewhat. Yet, for recent years like your 2018, it might be pretty close.
Also consider market, as I know prices on previously owned have...

For the number of units sold, compared to how many having had the issue (including a given percentage for which don't post up in forums) I'd say the statistics to be very very very low.
If you we...

=D> Well, I’m glad to see that Yamaha was listening (regarding my rant on post #2 of this thread).
The newer graphical screen Yamaha dash cluster redesign on select models now offers a PIN entry...

I'd guess that this is likely for an unpaved area and/or a designated storage location having ideal trailer access.
For example... I'd seen a 4 ski setup (no I didn't get pic or plans), the...

That so-called "boiling off" term you are using is a tad misleading . . . as I'm pretty sure you are referencing electrolysis (aka splitting water). Electrolysis is a very power-hungry process, and...

Well, I have great news for you ... because your (2/3rd) notion is not even close to being accurate. Aside from real-world testimonials from actual owners of both crafts - link here - the math is not...

As far as I know, Yamaha ECU/ECM utilizes k-line protocol. So in order to get that data into a chart-plotter, one would need to devise micro-controller of sorts that can interpret the k-line data,...

Yes... Watercraft Superstore.
Just never buy engines or internal engine parts from them.

Amsoil Marine would be at the top of my list. Royal Purple HPM or HPS is next. Do you have Royal available in Europe side?
http://www.royaltyproducts.com/hpm-high-performance-synthetic-marine-oil/...

Not sure either, but personally yes I can certainly rationalize this could be your root cause.
Reason, the metal siphon exit tube embedded in the nozzle is at such an angle that velocity from the...

I was just going to suggest the same thing, as K447 beat me to it - LOL !

I agree with K447, I would restore the bilge strainer setup in your craft to the original OEM hose routing, because it is...

Major pump damage (the kind that would lemon a sale) are typically very visible. Using a flashlight, and look into the jet pump discharge, then looking up underneath into the pump tunnel for any...

English is good - thank you.

Understand you have a 2014 VX hull and installed a FX engine - okay.
Yes, I do see problems in your picture above, as this very well can be your source of the water...

Good questions :



Correct on the cover. It is just a shroud/shield. Removing it simply permits easier visual inspection of the entire area, yet not necessary to remove if you have a mirror...

Not really all that surprising .... tempered steel is a lot like tempered glass. Now add-in a combination of cheap steel (too much iron) that was overly tempered - yes, that is a thing.

For your 2nd issue, if the craft is off and floating aka beached and it continues to take-on water, I'd remove the plastic shroud cover over the IB couplers so you can shine a flashlight in that...

Most 2004-2008 broken skis I ever see are ones that have thrown rods - hence oil in the hull. The mr1 (HO 1100cc) seemed to have been pushed to their upper limits, and the dry sump design makes them...

For contrast sake, I have a 2005 FXHO craft (much older), and it gets no water inside just sitting in the water. Now, after a whole afternoon out on rough waters and 50+ miles later, sure it might...

So if I read the original post (OP) correctly, we have a 2006 craft (electrics worked fine previously) that now has a 2009 engine (aka old mr1 for a newer one), and now there are electrical-related...

That would be a "no", I surely have not seen a 12/17 in practice. Then again, how many folks are (will be) running this setup? Maybe you'll pioneer something new & specific for your custom setup.
...

I appreciate your asking, but I am not a seasoned enough impeller tuner, so I’ll defer to others on here whom have way more field experience. There’s been good advice above so far. That said, my main...

I think most of you get what I’m saying about the pitch-spread factors (as opposed to the overall pitch itself) …. yet let me try it again with a few pics this time …


469020

Fig 1
Forget...