Search

Type: Posts; User: Mr. GP1800

Page 1 of 8 1 2 3 4

Search: Search took 0.13 seconds.

  1. Replies
    19
    Views
    2,239

    This is what I bought ...

    This is what I bought

    http://greenhulk.net/forums/attachment.php?attachmentid=470544&stc=1
  2. I use a 1/4 hex drive impact driver to spin bolts...

    I use a 1/4 hex drive impact driver to spin bolts out after breaking them loose by hand.
  3. While the large Garmin screens are nice the 4...

    While the large Garmin screens are nice the 4 inch screen models work just as well and can be had for about 300 bucks. The other upside of this is that you can set up the sonar for depth readings...
  4. Why not switch to one of the echomap Garmin units...

    Why not switch to one of the echomap Garmin units and install it on your ski. There are so many more options available to these units and some are cheaper than the handheld versions.
  5. Replies
    7
    Views
    388

    I had thought of possibly wrapping the aluminum...

    I had thought of possibly wrapping the aluminum pipe for the rear exhaust kit to try and soften the exhaust tone some. That aluminum pipe is very resonant and probably adds to the noise factor. I...
  6. Replies
    4
    Views
    186

    Hi jay!!!!

    Hi jay!!!!
  7. Replies
    16
    Views
    472

    Jay is the man for sure!!!!

    Jay is the man for sure!!!!
  8. Replies
    16
    Views
    472

    https://www.millennium-tech.net/serviceInfo.php?id...

    https://www.millennium-tech.net/serviceInfo.php?id=15

    This is for a 4 stroke head. But a 2 stroke head should be easier and cheaper.
  9. Replies
    16
    Views
    472

    View Post

    Iím pretty sure millennium can fix that head. Did you tell them itís a single piece head for 3 cylinders? I think they weld the damage and then use a cnc to machine the damaged head exactly like...
  10. Use soapy water on the hull. Then you can slide...

    Use soapy water on the hull. Then you can slide the graphic around and position it exactly. Use an old credit card to squeegee the water out from under the decal. Let it sit a day to fully adhere.
  11. Replies
    14
    Views
    359

    This is exactly what I did. On one machine the...

    This is exactly what I did. On one machine the nipple on the jet pump nozzle split while tapping it. Its thin cast aluminum so its easy to break it. So I cut it off and I tapped the nozzle casting....
  12. Replies
    19
    Views
    2,239

    I’m working on this now. I have purchased an...

    I’m working on this now. I have purchased an analog to NMEA 2000 converter. I should be able to tap into analog sensors to display any data I want.

    So far my plan is for engine rpm, fuel level,...
  13. Replies
    10
    Views
    532

    With a catch can or breather mod any oil that...

    With a catch can or breather mod any oil that does go to the breather won't end up in your intercooler. When I had the breather hose connected to my Riva intake I had enough oil in the tube that it...
  14. Iseem to remember buying 91 octane fuel on the...

    Iseem to remember buying 91 octane fuel on the water there last summer when I was there
  15. Replies
    15
    Views
    1,094

    it can still spin only one way and be bad. It...

    it can still spin only one way and be bad. It may be slipping when trying to make boost. Definitely check all the hose connections if they are all good then I’d still suspect the clutch
  16. He’s on facebook. I think his name is Juan santos

    He’s on facebook. I think his name is Juan santos
  17. Replies
    3
    Views
    199

    I wouldn’t be surprised if they could be...

    I wouldn’t be surprised if they could be modified to fit.
  18. Replies
    15
    Views
    1,094

    i just got a replacement clutch from my dealer...

    i just got a replacement clutch from my dealer and it was the old version. I was hoping for the new one
  19. Polaris made a reverse kit for the 96 SL 900. I...

    Polaris made a reverse kit for the 96 SL 900. I had a kit here. I’m sure the parts could be adapted. But there’s no way it could be actuated with a finger unless the reverse was electrically...
  20. Replies
    12
    Views
    1,606

    who uses an engine cover?

    who uses an engine cover?
  21. Replies
    10
    Views
    543

    If you don’t already have a copy of the factory...

    If you don’t already have a copy of the factory service manual get one and read through the engine removal procedure. The best advice I can give is to have a long 5mm ball end hex wrench for a 3/8...
  22. Replies
    12
    Views
    1,606

    Nice that you don't have to deal with nuts on the...

    Nice that you don't have to deal with nuts on the back side to take that off. I see threaded inserts in there.
  23. Replies
    19
    Views
    2,239

    K line is correct. I contacted Candoo and they...

    K line is correct. I contacted Candoo and they confirmed that for me. They are able to read that data for their diagnostic software and so can the maptuner setup. Unfortunately I need someone...
  24. Replies
    19
    Views
    2,239

    Through some google searches that's what I have...

    Through some google searches that's what I have been discovering. Im guessing that the Riva people and Candoo guys have deciphered these signals since they can display this data in their diagnostic...
  25. Replies
    18
    Views
    2,335

    Is there an ETA on these yet?

    Is there an ETA on these yet?
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4