Search

Type: Posts; User: livefromheaven

Search: Search took 0.00 seconds.

  1. Blown Headgasket (2008 RXP) Why and how to prevent?

    Spoke to my local SeaDoo dealer and it seems I have a blown head gasket. Jetski has 161 hours and I've only owned it about 3 months.

    I'm planning on having them do the head gasket work, but I'm...
  2. Yikes, jpt7779...

    Yikes, jpt7779 was right on the money. Blown head gasket.
  3. Which hose do I pinch to tow (RXP 2008)?

    Hoping someone can circle the hose in my picture I need to pinch to tow. Is it the hose marked with red tape? As you can see my coolant reservoir decided to empty into my hull :smt119
    ...
  4. Replies
    5
    Views
    226

    Would the intercooler cause the engine to...

    Would the intercooler cause the engine to overheat? I thought that was only cooling the exhaust?
  5. Replies
    5
    Views
    226

    08 RXP-X P1116 Engine Overheat?

    After 30 minutes or so of running (88 degrees outside, water temp 78 ) my 08 RXP-X flashed an "ENGINE" code and shut down. Hooked it up to a CanDoo at home and had code P1116 showing. Coolant is...
  6. Hmm... That's odd. Only thing I can think is...

    Hmm... That's odd. Only thing I can think is the yellow ignition wire or white coil wire is cut. Is the ski throwing a code?
  7. Pull the fuse from the brain box, does that...

    Pull the fuse from the brain box, does that change anything? If you're starting the jetski using the EMK, make sure you're pulling the trigger or the ski will die (wish that was called out more...
  8. Replies
    5
    Views
    821

    Just took a look at the Wataboard website and was...

    Just took a look at the Wataboard website and was pretty intrigued with the Power Flow System. That would also give me an extra 10ft or so of hose to use. Wonder if that's compatible with Zapata...
  9. Replies
    5
    Views
    821

    Got it dialed in and it's a blast! I have it set...

    Got it dialed in and it's a blast! I have it set to power level 3 and I'm still a little scared to go higher. What type of hose do you use? I'm thinking of getting the XArmor 23m to get further...
  10. Thread: 12v Hi

    by livefromheaven
    Replies
    11
    Views
    3,840

    08 RXP-X. Thinking it may be the voltage...

    08 RXP-X. Thinking it may be the voltage regulator so I'll start there first.
  11. Thread: 12v Hi

    by livefromheaven
    Replies
    11
    Views
    3,840

    Sorry to resurrect but I'm having the same issue...

    Sorry to resurrect but I'm having the same issue - High Voltage and code 1690. Did you ever find the fix for this?
  12. Replies
    5
    Views
    821

    EMK Throttle Adjustment?

    Bought a used 2008 RXP with a Flyboard EMK installed and trying to get the cable to fit correctly. Right now the cable at idle is pulling the butterfly open a bit causing my RPMs to jump to 3000 or...
  13. Replies
    11
    Views
    566

    Well I took the throttle cable off and RPMs...

    Well I took the throttle cable off and RPMs dropped to 2180 on the trailer which seems much more reasonable. I think I do just need to adjust the cable a bit and that should hopefully solve it. ...
  14. Replies
    11
    Views
    566

    Thanks, I'll loosen the adjustment a little. ...

    Thanks, I'll loosen the adjustment a little. Would that be the nut in the picture?

    http://greenhulk.net/forums/attachment.php?attachmentid=449772&stc=1
  15. Replies
    11
    Views
    566

    Update: Changed the oil, plugs, and drained the...

    Update: Changed the oil, plugs, and drained the old gas & added fresh 91. Bogging and top speed problems are gone and runs really well overall. High idle remains (3000RPM or so).

    I've found that...
  16. Replies
    11
    Views
    566

    Wouldn't a vacuum leak cause it to surge right...

    Wouldn't a vacuum leak cause it to surge right away on startup? Why does it happen so consistently after 10 seconds or so? I'll look into it tomorrow though and grab a video to post here.
  17. Replies
    11
    Views
    566

    2008 RXP-X High/Surging Idle

    Trying to troubleshoot this (new to me) 2008 RXP. I test drove with the guy I bought it from and it seemed to run pretty well at the time. Now at home the ski idles around 2300 and after 5-10...
  18. Replies
    3
    Views
    307

    Atlanis Flush Adapter Question

    Sorry if this is a stupid question - am I safe to keep this flush adapter connected to the ski while taking it out riding (2008 RXP-X)? It's kind of a pain to screw/unscrew it but I don't want to...
  19. 2008 RXP-X Reverse Cable Replacement

    Hi, the reverse cable on my 2008 RXP-X 255 seems to have snapped. Which parts do I need to order (OEM or aftermarket) and are there any videos or manuals online for doing this? Anything else I...
  20. Replies
    0
    Views
    473

    2018 1800GP with Flyboard?

    Looking at purchasing a 2018 Yamaha 1800GP and was wondering if anyone had tried this out with a Flyboard. I assume it would have plenty of power, but how does it compare to a Seadoo RXP?

    Does...
  21. 98 Yamaha Waverunner 760GP - No Crank

    I took the Waverunner 760GP out on some choppy water today and it ran fine for about 40 minutes or so, until the LCD screen started flashing "VOLT" and the red warning light came on. I drove back to...
  22. Thanks, that helps clear some things up. I think...

    Thanks, that helps clear some things up. I think they only sent 1 #1, but I'll double check. What should I do with the other open holes from the choke shaft (3 & 4)? Do they need to be plugged or...
  23. 98 Waverunner 760 - Riva Primer Kit Install (need help)

    Hello, my jetski has been really hard to start the past couple of seasons, and after reading some of the posts here I decided to try installing a Riva Primer kit in place of the old choke. I have...
Results 1 to 23 of 23