Search

The Polaris service manual doesn't list any # for static timing at all, the same # came up on three skis I checked non-fuel injected 1200's.

the Polaris cdi is strictly a retard unit. if the...

i've also got a chopped stator cover,uses 2 bolts to hold just a small part over the bendix to keep it in place,that way you can access right to the allen bolts to time it if need be with out taking...

as you rotate the crank back and forth from tdc to btdc its easy to actually go a full revolution on the dial, 25 degrees or 40 degrees.

but you have to go past 40 degrees BTDC to reset the...

light or volt meter moves when the piston reaches .350" before tdc in direction of rotation. you gotta count needle revolutions and always back rotate past so you are approching the trigger in the...

disconnect stator harness; connect 9 volt battery + on stator Brown, battery - on stator Gray

Ohm meter - probe on Gray, ohm meter + probe on stator Red wire (which is the MAG cylinder Hall Effect...

got a dial indicator????i've bench timed both motors and they were right on