Search

have to remove head and clean sand around cylinders and were the 2 steel fittings are on right rear of engine make sure they are clean and free.

ecu causes gas in oil with that motor common.

This one was 1/8 from bottom

after finding this i would say close. because when i do a stage 1 plus on 2012 to 2018 speeds are close to that.

solas with my modded stock ride plate.

sorry did not take pics.

Hello everyone i did a stage 1 plus on a 2019 fxsvho and was only getting 73 mph. at 8000 rpm then pitch impeller to get more rpm gained a little. So looked at it further to see why checked...

Just letting everyone know i am getting a lot of PM'S and calls from people saying ‘I bought a used plate that you modded and have concerns about it’.

I tell them to send pictures and not even...

just letting everyone know i am getting a lot of PM'S and calls from people saying i bought a used plate that you modded and have concerns about it. I tell them to send pictures and not even close...

a shorted water temp sensor will kill spark check that. cdi not common on a gpr.

sounds like a impeller liner swollen. no still in business had issues with phone line do to storm Friday phone back in service.

Ive seen it happen wide open not on trailer. Gasket will be good just clean. Plugs are in front and rear of cams.

remove valve cover look to make sure no cam plugs came out have seen many do the same thing. cause a warning wide open throttle.

thank you yellow jacket

awesome numbers Gus

Ebay

with a same speed FZR or GP 1800 the FX would be able to kill them in the rough.

one thing is that ski is not lose that ski is locked down there is only one cut for the fx plate. That ski would be a killer in the rough with the fx platform.

awesome Dave now have to get rpm working to know were your at.

low 9's not super crazy.

i did all the work that is a stock wheel 100% unless Dave changed wheels from this morning after picking up ski and going straight to the lake.

yep

the older gp 1800 had a factory reinforcement but were the pump shoe inserts were it was cut out they just sat flush with hull use to tend to crack the area. Now on the 2019 the reinforcement is all...

on the 2019 gp1800r yamaha took care of the problem with the hull cracking by the pump shoe inserts.

I had the same thing about 2 months ago, he had it at another shop could not figure out then brought to me we checked every sensor and ecu and everything checked good we were trying to fix it for a...