Search

The updated 2021 clutch is compatible with all 2013 to current svho and sho ski's ,and all 08-12 sho ski's that have been previously updated to the 57tooth idler gear, too soon to to tell but...

after riding sat the r's r back to 9120 so maybe the clutch is still hanging in there...better air..hey joe it was good riding with you sat and thanks for lunch.

I'm now running a stock clutch that has been micro polished and cryogenically treated. So far it's holding up not enough hours on it yet to make any judgement on it..

You currently have two choices. The OEM replacement clutch, or the Dean's Team clutch. While the Dean's Team clutch is expensive, it's the only thing holding up over the long term on race skis.


...

It’s because your going to fast!!
Try 3m 4200 it’s what I used and it’s holding tight after 3 years

The mid-wall is a composite material. I would not trust self-taping screws to work long term, as the hull flexes and bounces hard as you ride fast across rough water.

Use stainless steel bolt...

Here is my install.

http://greenhulk.net/forums/attachment.php?attachmentid=459945&stc=1

http://greenhulk.net/forums/attachment.php?attachmentid=459946&stc=1

Here's a Groco mounted.459936

Not a groco but install should basically the same

The instructions on the riva cooling kit can be found on their website. It has the diagram in there.

go turbo never a clutch problem agen :)

I am telling you what has worked for my 17 GP 1800.

Good luck with your ski

I run stage 3 19lb never a problem.

Can you PM me his contant information?

thx

Can you PM me his contant information?

Robert

+1 - be most appreciative to know what region / state he is in .... thanks in advance!

Yup!! My Dad used to ride with me for years and every time I would get a new model and discover all of these little flaws, he would always say, "Kiddo, it's guys like you and me that do their (the...

I think sea doo does the same thing only to an even larger extent. I’m glad my ski was only 13k and not 17k


what I’m saying is that we are all guinea pigs of some sort. Brand doesn’t matter

Its pretty cheaply done. The fzr/fzs glove box is even worse

Go to your Yamaha dealer and get a new latch for a few dollars?

Email JesusG your hin and email linked the account. He will either adjust the limiter on a existing tune and send it back it will show up when you resync( it will not show up on computer drop down,...

They 100% read the forum.

Some no good SOB's!!! I will have to find somebody willing to tackle the reinforcement.

glad im not the only one counting down the days

I did a Stage 3 setup 19 psi, 3 bar map on one of my FX Cruisers when it was brand new, I have two identical skis. The ski had 9 hours so I felt the stock pump was sufficient. It ran 91 mph with no...