Search

I like the idea of using the blank port with the brass fittings. Seeing the previous posts of similar repairs had me thinking along those lines...but you hammered it out. I'll do it once my shoulder...

Fair enough! I was warned not to get tough with those brittle little things.
Give me contact info for the part. Thanks.

I got the fuel pump out. The fuel regulator is in its proper place. The pump itself has 65+ ohms at the contacts. However at the plug on top the reading is OL. The red wire to the pump is bad the...

What measures can be taken to stop this goofy thing from falling off again?÷

Engine fires up with gas dumped in throttle body.
No pressure/gas at schrader valve location

Compression: #1, 8.75lb, 125kg
#2, 9.0lb, 130kg
#3, 8.5lb, 120kg
Cranking shows 300 rpm
Shrader valve apparently removed by original owner who...

I've had this '03 MSX140 for a couple years now, but never ran good. Sometimes the ski starts and quickly dies when revved.
I changed plugs, old gas and oil. Then it ran good on trailer while...