Search

Type: Posts; User: K447

Search: Search took 0.11 seconds.

  1. Welcome. Start your own new thread. Post...

    Welcome.

    Start your own new thread.

    Post the specifics and diagnostics you have done so far, the service history of the machine.

    Has it ever worked properly for you?

    Do you have access...
  2. That spring and the attached plastic end bit and...

    That spring and the attached plastic end bit and the bushing washer are all there to keep the entire Bendix assembly in position.

    Without the spring the Bendix can rattle around and I suppose...
  3. http://greenhulk.net/forums/attachment.php?attachm...

    http://greenhulk.net/forums/attachment.php?attachmentid=473406&stc=1
  4. On a Ficht engine if the woodruff key was in...

    On a Ficht engine if the woodruff key was in place in the keyway slot then the mechanical timing is correct. There is no adjustment.

    You can confirm this by setting the front piston to TDC and...
  5. It is not entirely certain to me that the...

    It is not entirely certain to me that the flywheel visible through the CPS port is a Polaris Ficht flywheel :-k

    The ribs look odd somehow. I could be wrong, of course.

    Here is what a genuine...
  6. Since you measured AC voltages that were not...

    Since you measured AC voltages that were not wildly far out of the expected ranges, my guess is your meter may not be very accurate on volts or ohms.

    Measuring 0.0 ohms on the meter suggests the...
  7. I just see a single photo. Fuel hoses clamped...

    I just see a single photo.
    Fuel hoses clamped flat, rear fuel injector disconnected.

    Tip: Those fuel hoses look original and rather aged. I would be replacing all of them as part of refreshing...
  8. Must upload video to YouTube or another service....

    Must upload video to YouTube or another service. Then link to it here.

    No direct video upload to GH.

    http://polarispwcknowledge.shorturl.com/first-things-to-do
  9. Welcome. Given the diagnostics you have done...

    Welcome.

    Given the diagnostics you have done so far, my initial guess is the either the flywheel has rotated out of time on the crank front.

    Or the EMM has an internal failure. Sometimes these...
Results 1 to 9 of 9