Search

Type: Posts; User: GlenT

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: Stroked 4-Tec

    by GlenT
    Replies
    6
    Views
    393

    I've seen that mod done on chevy ls motor oil...

    I've seen that mod done on chevy ls motor oil pumps.
  2. Sounds like its okay for now. I suggest getting a...

    Sounds like its okay for now. I suggest getting a service manual and following the inspection checklist. Owners manual may have it as well. The older 2 bearing pumps can start to have issues as early...
  3. 2012 and newer jet pumps were updated from double...

    2012 and newer jet pumps were updated from double to triple bearings/seals. As standard practice, the pump should be inspected annually for water intrusion. On gps top speed should be ~62-64 mph...
  4. In order to get a tight seal, you need to use the...

    In order to get a tight seal, you need to use the correct metric I.D. fuel hose as defined by Polaris. Make sure it's marine rated.
  5. Replies
    4
    Views
    193

    The old style bearing carrier is actually a more...

    The old style bearing carrier is actually a more reliable design than the late 90's carbon seal, provided you grease it regularly. Looks like yours is missing the zerk fitting and the needle bearings...
  6. It's really worth what someone is willing to pay...

    It's really worth what someone is willing to pay for it. However, based on you description I think $4500-5000 is right in the ballpark for a fair value. Yes, the jet pump was updated in 2012 to...
  7. Replies
    25
    Views
    8,415

    Back in the day, I used Jet Hot coatings on all...

    Back in the day, I used Jet Hot coatings on all my muscle car exhaust manifolds/headers. They would coat both internal and external surfaces. That stuff was awesome. Had a lifetime guarantee. I...
  8. Thread: New 160 lx

    by GlenT
    Replies
    27
    Views
    3,828

    That hull design goes back to 2000. So, your best...

    That hull design goes back to 2000. So, your best option is to try and find something used. R&D was the most popular. I'm not aware of any companies still producing the older parts. Maybe Riva will...
  9. Looks like you damaged the stator coils when you...

    Looks like you damaged the stator coils when you installed the stator cover. To me, it looks like the coils made contact with the flywheel magnets. In the future, buy some extra long bolts at HD and...
  10. Replies
    1
    Views
    144

    https://www.babbittsonline.com/oemcatalogs/c/all/k...

    https://www.babbittsonline.com/oemcatalogs/c/all/kawasaki_accessories-pfd_39_s_life_vests
  11. Weldwood contact cement is good stuff to reapply...

    Weldwood contact cement is good stuff to reapply the mat. Lightly sand the affected area of the top deck . You can mask an outline from the original mat for placement. Clean the mat side of any...
  12. 3m adhesive remover (white can, red graphics) is...

    3m adhesive remover (white can, red graphics) is what I've used for years. Soak a few paper towels and cover the area for 30 minutes. Works best in higher temps. Use a plastic scraper tool. Adhere to...
  13. That spring belongs in the recessed hole in the...

    That spring belongs in the recessed hole in the stator cover. It aligns with the shaft end of the starter bendix.
  14. a) For Idle:...

    a) For Idle:
    http://greenhulk.net/forums/attachment.php?attachmentid=466405&stc=1

    b) Possible the throttle body shaft spring is weak. Take the cable off and check to see if the spring has...
  15. Thread: 2021 Pricing

    by GlenT
    Replies
    2
    Views
    264

    Boat show deals are the best, if you can wait.

    Boat show deals are the best, if you can wait.
  16. Replies
    6
    Views
    345

    Look at the oil pump when pulling the throttle to...

    Look at the oil pump when pulling the throttle to see how the arm moves. Just hold the arm full open. I've attached the in-line check valve direction from the service manual. ...
  17. Replies
    6
    Views
    345

    Take a look a the GH OEM parts diagram for the...

    Take a look a the GH OEM parts diagram for the oil pump to see how everything is connected. It doesn't show oil flow, but based on the check valve orientation you should be able to determine the...
  18. Replies
    4
    Views
    236

    Your owners and/or service manuals should have...

    Your owners and/or service manuals should have it. Otherwise, Google it.
  19. Replies
    4
    Views
    252

    Inspect the inside the pump housing for debris....

    Inspect the inside the pump housing for debris. If you don't see anything obvious, you may need to pull the pump and inspect the driveshaft/impeller splines and pump shaft. How many hrs?
  20. Replies
    17
    Views
    539

    Interested to hear how it performs.

    Interested to hear how it performs.
  21. Replies
    23
    Views
    840

    Yeah, that 1100 is dangerous at high speed.

    Yeah, that 1100 is dangerous at high speed.
  22. Replies
    17
    Views
    539

    Thought about using an older display/wiring...

    Thought about using an older display/wiring harness from a 1999 stx1100 or 2000 stx 900?
  23. Replies
    6
    Views
    241

    Pump Spec's: ...

    Pump Spec's:

    http://greenhulk.net/forums/attachment.php?attachmentid=465734&stc=1
  24. Replies
    6
    Views
    241

    Do you have pump shoe plugs installed? May need...

    Do you have pump shoe plugs installed? May need to step up impeller pitch if it's not cavitation related. Did you check impeller blade to pump housing clearance?
  25. Replies
    4
    Views
    157

    To start, you need to perform a stator cranking...

    To start, you need to perform a stator cranking output voltage test, for both the ignition and injectors (20 VDC & 45 VDC). Probably a resistance check, as well. ...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4