Search

Type: Posts; User: steelmesh

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    13
    Views
    554

    I had a random bog, until I turned it to reserve...

    I had a random bog, until I turned it to reserve (lower fuel pickup point), maybe try that next time it happens.
  2. Replies
    65
    Views
    1,928

    I went through hell with a 66V, pulled the carbs...

    I went through hell with a 66V, pulled the carbs 12 times making fueling adjustments. READ THE MIKUNI MANUAL: https://www.mikuni.com/pdf/sbn_manual.pdf

    Idle - adjust low speed screws adjustments...
  3. If it's bogging out no power possibly stalling...

    If it's bogging out no power possibly stalling then you're probably lean. If it bogs but struggles to run then you're probably rich.

    From what I learned, you'll need to compare throttle...
  4. Replies
    65
    Views
    1,928

    Is that logic backwards or am I backwards? I...

    Is that logic backwards or am I backwards? I thought black plugs mean't rich.
  5. Replies
    5
    Views
    329

    https://www.youtube.com/watch?v=8rk0tKtiVic ...

    https://www.youtube.com/watch?v=8rk0tKtiVic

    Berkbile gum cutter is insane, it will melt your gloves but is the fastest solvent I have ever used for cleaning build up on engine parts. I can sit...
  6. Replies
    12
    Views
    542

    You might be able to search for "gp1300r throttle...

    You might be able to search for "gp1300r throttle cable" on ebay, some sellers should include the OEM number to help people find the product if they search via the part number only. Then google that...
  7. Replies
    12
    Views
    542

    Based on the dirt bike cable lubers that clamp...

    Based on the dirt bike cable lubers that clamp onto the cable then you insert the aerosol can red sprayer tube and it will pressure the system and force lube through the cable.

    I made my own...
  8. Replies
    24
    Views
    759

    Just use the OEM parts finder on any online...

    Just use the OEM parts finder on any online dealer because it shows you exploded views and usually answers these inquiries, maybe try [site sponsor here] or google "yamaha parts online" to find...
  9. WD-40 is a good "cleaner" in regards to removing...

    WD-40 is a good "cleaner" in regards to removing gunk, grease, oils but for sure not a cleaner in the sense it will prep the surface like alcohols, acetone and dawn.

    A trick I learned from...
  10. Replies
    14
    Views
    622

    Reference these pump to see the lines. If they...

    Reference these pump to see the lines. If they look like this then they probably have never been replaced. Make it a point that you MUST replace them when negotiating as in you'll have to pay...
  11. Silicone spray is an excellent lube for old...

    Silicone spray is an excellent lube for old rubber parts and is chemically compatible with rubber
  12. Replies
    24
    Views
    759

    Drill method is awesome and real world because...

    Drill method is awesome and real world because the engine will spin it like the drill so you can catch any problems, be sure to match the direction of the spin (easy, look in the jet pump to see...
  13. Bearings have some play that will be taken up...

    Bearings have some play that will be taken up after it gets hot. WD-40 isn't a good lubrication but better than nothing for sure and is a good enough cleaner and metal protector as I'm sure you...
  14. Replies
    24
    Views
    759

    Yes it's up front on the cover. I disassembled...

    Yes it's up front on the cover. I disassembled the pump on an old seadoo 717. I couldn't find a rebuild kit but decided to take it apart anyway to see how it looked, it was perfect inside. I...
  15. Replies
    65
    Views
    1,928

    Did anyone bring up the issue with new pistons...

    Did anyone bring up the issue with new pistons being shipped with the wrong rings?

    Generally speaking visual aid on 2T ring locators:
    http://www.dansmc.com/ringpeg.jpg
  16. Replies
    65
    Views
    1,928

    Just sharing what I am seeing with my 2000...

    Just sharing what I am seeing with my 2000 GP1200R 66V, I have pulled the carbs 11 times now making changes, I have gone out on the water several times learning about what changes I need to make....
  17. Replies
    2
    Views
    240

    PWC parts suppliers

    PWC parts suppliers are generally garbage. I have purchased thousands of dollars in parts for my machines over the past 2 years including my car, electric bike, motorcycle, lawnmower, snowblower,...
  18. Replies
    14
    Views
    622

    I just tracked him down showed me pictures from...

    I just tracked him down showed me pictures from last year it looks new, 95' GTX
  19. Replies
    14
    Views
    622

    I just had a conversation yesterday with a guy at...

    I just had a conversation yesterday with a guy at work, says he's got over 800 hours on his old 2T seadoo, never been rebuilt. This guy is the senior engine builder at work, replaces the oil lines...
  20. Replies
    8
    Views
    444

    I see what you did there =D>

    I see what you did there =D>
  21. This is a common myth with all people who aren't...

    This is a common myth with all people who aren't experienced with machinery: Rev it up! That will fix it.

    I built a sweet electric trike, I put a ton of miles on it took it to outdoor events and...
  22. That is a good suspicion, take your air...

    That is a good suspicion, take your air compressor and blow into the compression tester (why blow guns with the rubber tips are great), if your air compressor regulator is set to 80 psi the...
  23. Replies
    3
    Views
    1,995

    You should binge the lock picking lawyer on...

    You should binge the lock picking lawyer on Youtube. It's so depressing, he proves all padlocks can be defeated quickly and anything you buy from home depot can be opened in 0.1-10 seconds. There...
  24. You should see some cross hatch left on the...

    You should see some cross hatch left on the cylinder walls, if not you're probably going to need to rework or get replacements. Do you have a way to check the bore diameters? You should pull the jug...
  25. Replies
    6
    Views
    263

    Dark flat black coverage on the spark plug would...

    Dark flat black coverage on the spark plug would be a sign of running rich, at least at lower throttle positions if you didn't do a chop test. Recently going through the 66V carbs, there is a lot...
Results 1 to 25 of 120
Page 1 of 5 1 2 3 4