Search

https://jetskiparts.com/products/new-after-market-seadoo-opas-block-off-kit-gtx-gti-rxp-gtx-gti-rxp-rxt-riva-4tec?variant=17611264775

Those 580cc motors are reliable but not very powerful. I had a ‘94 GTS new when it came out, old Betsy. The SP came with an aluminum impeller that could be replaced with a stainless steel one, either...

Anybody? Here is the blank spaces I need to put clips on.

http://greenhulk.net/forums/attachment.php?attachmentid=465750&stc=1http://greenhulk.net/forums/attachment.php?attachmentid=465751&stc=1

The buzzer and the gauges are probably separate issues, but have you checked the connections coming out of the hood?
The stock buzzers on these always fail. Best to either buy one and splice it in...

Thanks! What turns are you using for the High and Low speed needles? Stock pop-off springs?

What is the max RPMs these things turn on a GTXL? I’m running 90 octane ethanol-free

I had a local shop rebuild my engine and carbs over the winter (bought it as a hull and a box of parts for an engine) and have been trying to dial it this summer.
+0.50 pistons and a Solas Concord...

Good find, glad you've got it running. I think they are set 2700-3000 rpm out of the water. 2250 is a little low out of the water, and WAY high for in the water.

I've never seen a gray 657x pipe before, although it could be...most are purple, but I've only seen a handful in my life. The big visual difference is the base 657 pipe has a solid cross-brace:
...

Where are you located? Most of the places that advertise 'lots of parts' for sale usually have one. I found one when I was at Five Start Service in Michigan last summer, but I had to ask they didn't...

Good find! Never seen at before in the marine world, but I have in the automotive business.

Can anyone post pictures of all the Tie Clamp and Tie Wrap mounting locations on the inside of a late 90's GTX-L hull? When I bought mine almost all had glue failure and had fallen off, so I bought...

Sorry for the delay, life’s been crazy busy. Here is the pic I took as soon as I got them on. I ended up rotating the throttle side so the flat inner guard is flush with the thumb throttle, otherwise...

Are you sure its an X and not a normal 657? Most people don't know the difference, the exhaust pipe is the best telltale? Even if it is and thats all they changed, you're going to need a different...

I installed the 120mm ODI Ruffian PWC grips on my '96 GSX this spring and they are great. They are a bit longer than what the handle is, so the outer clamp is just there for looks, however the setup...

Compression sounds a little low, I believe they should be 150-160psi when new, but should still run at 130 if everything else is in order. Have you removed the RAVE valves to see if they are sludged...

I'm missing the hanger the RAVE Solenoid attaches to on the inside of the hull (I'm sure the adhesive failed like the rest of the hangers on 90's Seadoos). It was just hanging around, zip-tied to the...

Those red centers are supposed to be turned until flush with the black ring on the 782?

A picture would really help. Otherwise maybe a parts fiche:

https://hollandsport.nl/files/manuals/sea-doo/1995/1995-seadoo-gts-gtx-parts-catalog.pdf

Or the manual:
...

Like this? http://www.ericmalone.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=wps-solasimpsea

Btw, the first GTI was in 1996. I had one new...loved it dearly until I rode a 782.

Time to go back together with the new ride plate.

http://greenhulk.net/forums/attachment.php?attachmentid=464295&stc=1

Found it:

http://seadoomanuals.net/download/pdf/service/manuals/1998/1998-seadoo-shop-manual.PDF

I just had the hull re-gelcoated on my GTX-L and I’m ready to go back together, but does anyone have the manual for it? I’m looking for torque specs and any tips. I have the shims and bolts marked...

12 years later this was a huge help in a snag. Thanks!

I found a 240 grit nylon wheel at the hardware store. Took some time, but it got it all off with minimum scuffing.
...

I pulled my jet pump and pump support plate from the GTX-L to get some gel coat repaired from the previous owner apparently sucking up some massive rocks. Before I take it to the fiberglass repair...