Search

Type: Posts; User: Green Hulk

Page 1 of 8 1 2 3 4

Search: Search took 0.31 seconds.

  1. Replies
    8
    Views
    356

    Very nice results. This past weekend on our BONE...

    Very nice results. This past weekend on our BONE STOCK GP1800R SVHO we ran 81-81 mph with only the MaptunerX AquaX 8800 tune and slightly depitched stock impeller to get the RPM up to 8400 (safe for...
  2. Replies
    8
    Views
    356

    You can look at the staged kits in the store and...

    You can look at the staged kits in the store and see required parts for each level of stages
    Stage 1 is just a maptunerx tune (bone stock)...
  3. You will need to remove and clean your...

    You will need to remove and clean your intercooler out to remove the oil and clean the coils. Some people use gas, but this is dangerous for obvious reasons. You can also get a product at the...
  4. The Fizzle nozzle rings are available to purchase...

    The Fizzle nozzle rings are available to purchase in the GreenHulk store using the link in your post. They are not stamped as to size, but you can easily measure them to see what diameter they are.
  5. Replies
    4
    Views
    132

    Start with good fresh bores when installing new...

    Start with good fresh bores when installing new pistons. I like to use .0045 piston to wall clearance with the CP pistons.... don't go with their recommended .003, that's too tight.
  6. Yes, many guys have made the upgrade on their...

    Yes, many guys have made the upgrade on their older skis.
  7. Replies
    4
    Views
    326

    There is no performance increase. If you want to...

    There is no performance increase. If you want to increase RPM use this part, it normally add's 80 rpm
    https://www.4-tecperformance.com/images/sea-doo_exhaust_spacer__63064.1493998898.jpg
    Sea Doo...
  8. Excellent results! thanks for sharing!

    Excellent results! thanks for sharing!
  9. Replies
    16
    Views
    1,221

    Worx is a very good rough water ride plate, but...

    Worx is a very good rough water ride plate, but it will slow you down a mph or two on flat water. Riva will be a better handling ride plate giving more speed. Save $$$ off either in the...
  10. Because RPM will dictate how fast you go. ...

    Because RPM will dictate how fast you go.



    Because a ride plate extension will slow the ski down, especially one that long.
  11. Replies
    2
    Views
    209

    Absolutely install new oil pumps when rebuilding...

    Absolutely install new oil pumps when rebuilding the engine. They are not that expensive. Neve use the Chinese knock off parts. Definitely go OEM for internal engine components.
  12. Replies
    11
    Views
    497

    Supercharger rebuilds are recommended every 100...

    Supercharger rebuilds are recommended every 100 hours, or about every 2 years. The 2 year thing comes into play because the bearing cages are plastic and they get bottle over time after many heat...
  13. Replies
    25
    Views
    4,147

    I just added the 2021 manual to the store. ...

    I just added the 2021 manual to the store.
    https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=257&products_id=4567
  14. Replies
    3
    Views
    134

    Glenn at Impros is really good at what he does....

    Glenn at Impros is really good at what he does. He should have it pretty close to perfect.
  15. Replies
    3
    Views
    134

    the stock pitch isn't advertised. If you are...

    the stock pitch isn't advertised. If you are trying to compare stock pitch to Solas pitch, or even Skat Trak pitch that doesn't work. They are all different blade designs and cannot be compared.
  16. Replies
    19
    Views
    664

    This is exactly why I recommend the wedge over a...

    This is exactly why I recommend the wedge over a trim extension for the FX
  17. Replies
    19
    Views
    664

    Yes, it fits all 2015 and newer

    Yes, it fits all 2015 and newer
  18. Replies
    19
    Views
    664

    This is what you need...

    This is what you need
    https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=350_94_384&products_id=5250
  19. Replies
    11
    Views
    588

    Thank you!

    Thank you!
  20. Nice job Andrew!!!

    Nice job Andrew!!!
  21. Replies
    2
    Views
    113

    Go with a 15/19, run it with all your mods and...

    Go with a 15/19, run it with all your mods and note RPM. Adjust the impeller if necessary. Your performance will be best with the 15/19.
  22. Replies
    25
    Views
    4,147

    Congrats on the new skis! What you are...

    Congrats on the new skis!

    What you are describing is cavitation. You may have sucked some debris into the pump.
  23. Replies
    1
    Views
    149

    Drop the ride plate completely off.

    Drop the ride plate completely off.
  24. Replies
    19
    Views
    703

    He will need a new fob. He can program it himself...

    He will need a new fob. He can program it himself with the key fob tool

    Yamaha Fob...
  25. Replies
    9
    Views
    307

    I personally would go back with another 15/19R...

    I personally would go back with another 15/19R
    https://www.4-tecperformance.com/index.php?main_page=product_info&cPath=350_1_43&products_id=7823&zenid=be0a340dno7cdmk5cmqk6lvt97
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4