Search

I did talk to them and since it is a 155mm pump... they cannot do it. I am looking for an alternative to the dreaded S_T in Fl... no luck yet...

I am in need of someone one remanufacture the pump for my 08 Ultra LX. I have a set of bearings for it although, the wear ring needs to be replaced and the pump needs to be cleaned up (bead...

Greg,
Sadly, I am over 1/2 pregnant with the other way... following the book. I see your wisdom although, at this point, I am loathe to ponder taking the bottom end apart again... I am thinking...

Quick question... I also have an 08 Ultra LX that is having some pump issues... like bad/swelled wear ring. Question - does it use the same ring as the 12f or 15f? In particular, do you guys know...

I may try the strategy of foam under the pistons. I did try to worm gear clamps with plumber pipe hangers - which worked okay until the pistons rocked around pretty badly. Maybe a combo of these...

I have a motor from an 06 STX-12f that I am trying to get back together and the pistons/rings are simply not cooperating (trying to use my hands and a few other things to compress the rings). I...

I have an 06 STX-12f which is having fuel issues. Specifically, I am finding that the fuel pump has no power. When I try to start it, I see that it get a "flash" of power and then nothing. Fuel...

I plan to pick up an 08 GTX SC ski with about 70 hours. My question is - to rebuild the SC now or wait?

I know that there are known bearing issues with these units and I also know that it is...

I agree with the no drilling. Only way to do it would be to replace the pan (ouch). I think tying it off is the best path. Thanks

I have been working on an 06 STX 12f I picked up. Recently, I noticed that there is (what I think to be) a temp sensor connected to the front of the wiring harness which has nowhere to go (first...

I have an 06 STX 12F basket case I am trying to bring back around. I cleaned up the cylinders today with the goal of putting the motor back together and noticed that the # 4 cylinder is missing some...

I have run into the same problems recently with an 03 STX-12f. The original crank (with a bad journal) was marked although, the replacement was not marked. After several bouts of measurements,...

I have a 2006 STX-12f that will run from time to time and then... not. This is what I have found:

I appear to have spark all of the time. Not sure about fuel.

The fuel pump is good. When I...

I see although, I wonder where on the ignition box the indicator is? Is there a label? I am still in the assembly stage here although trying to make sure that I get the correct parts. Thanks

I have a timing rotor question. I bought two "basket case" skis: a 2003 and a 2006 STX 12f. Motors are in different states of disrepair. One motor has a timing rotor... other has a broken timing...

Anybody know the process to replace steering cable for an 05 3D? Regular ski I can handle. This 3D is a different beastie

Just sent a message. Thanks

Are there any places out there to get a reasonable used motor for an 05 stx 12f?

I have an 02F12x that I am trying to finish (basket case, rebuilt motor, etc, during winter). Once I got it back together, I was getting an odd error message (46??) indicating a bad temp sensor. ...

So, if you were me... invest in one or wait for something else??

I have an 2006 ski with a gauge cluster that is not working (nothing on the display). It has a part number of 25031-3754.

I see similar clusters for sale from later skis (2014s) that have a...

I have an 05 3d which is having an issue with the start/stop button (or something related). I recently replaced the DESS post to solve one problem... and then this started. I can place the key on...

I did figure this out. Turns out that the plug boot for the PTO plug had gone bad which was causing it to miss badly on that cylinder. New plug boot... all good to go now.

help me understand the mpem... how could that be causing this... and/or is this the typical intermittent computer error?

have done that... no exhaust leaks. In fact, I have taken to testing it in the water without the seat to see what it is doing.