Search

Type: Posts; User: ahultin

Search: Search took 0.00 seconds.

  1. Sticky: Well bummer, thank you though!

    Well bummer, thank you though!
  2. Sticky: is this airtex pump rebuild part confirmed to be...

    is this airtex pump rebuild part confirmed to be low enough amperage to not impact the emm?
  3. Extract broken motor mount bolt 2001 Virage Tx?

    So i was going thru our Virage Tx that we just replaced the drive shaft on and found that the bolt heads were missing on the front left motor mount. I would venture to guess this is the source of the...
  4. Replies
    15
    Views
    864

    i was able to drill out , tap and heli-coil the...

    i was able to drill out , tap and heli-coil the pump base and got everything reinstalled. I used permatex ultra gray for the ride plate
    e based on a quick greenhulk search. Everything seems to be...
  5. Replies
    15
    Views
    864

    So I have drilled the broken bolt out to 1/4 inch...

    So I have drilled the broken bolt out to 1/4 inch which is what the tap I am using called for however there is still enough of the stainless bolt in there clogging the threads that I cannot run the...
  6. Replies
    15
    Views
    864

    So the saga continues but i am far enough down...

    So the saga continues but i am far enough down the rabbit hole that there is no going back. I got the ride plate removed (side note, what kind of sealant do i use to put it back?) and soaked the...
  7. Replies
    15
    Views
    864

    Pulled off the pump and the shaft came right out,...

    Pulled off the pump and the shaft came right out, it was sheared at the thru hull bearing. Have a replacement shaft coming and already had a thru hull bearing that came with the coupler I had...
  8. Replies
    15
    Views
    864

    Zero forward movement. I went under it today...

    Zero forward movement.
    I went under it today while it was running, from above , the driveshaft is clearly moving after the coupler. From the bottom, there is no driveshaft movement. Is the...
  9. Replies
    15
    Views
    864

    2001 Virage TX No thrust

    I have a 2001 Virage tx that has been sitting for several yrs as the last time we used it we had to be towed to shore due to no thrust. I had initially thought that it was the driveshaft coupler and...
Results 1 to 9 of 9