Search

This thread is giving me the itch to put a turbo on one of my skis. Might have to scale back a car project.

Has anyone been able to leave the mid wall in place and mount the turbo behind it? ...

I agree with 1 FAST SHO you should strongly consider staying with a SC. But if you go turbo, I would go with the 3071. The internally gated, TIAL fully water jacketed version probably suites you...

IC sold.

My clutch did not just go out. It would act up from time to time and not pull rpm.

Robert

I have the IC to Throttle body blue hose. I missed taking a picture of it.

Robert

What you see pictured is what you get. Hardware to mount IC and IC to SC hose.

Robert

more pics

Off my 2016 FX Cruiser SVHO.

Exhaust - $115 plus shipping.
IC - $350 plus shipping.

Both parts in good working condition. 30 hours

US shipping only.

Robert

I found on my 2016 Cruiser it was easy to go 91 with the full Stage 3 setup and a 19 wheel and 13/20 prop in the cooler conditions. It took 9400 to 9500 rpm to do 91/92 mph. There are people who...

I have two 2016 FXSVHO's. Mine stalled when they were brand new and cold. I put a AFR gauge on and you can see the ski go dead lean and stall. If you data log it, Jesus will fix you up. It is sad...

Are you data logging? If not, I would invest in it.

Robert

100% correct.

Robert

This would have to be the worst tuned ski ever. 70 mph at 12krpm. Probably a typo.

Robert

Spray 2 coats of spray copper coat. Let the first flash for 3 minutes and then spray the second coat. Assemble after second coat flashes for 1 minute.

Robert

I have run the stock wheel, 19 psi and 23 psi wheels (19 and 23 wheels were bought in 2016) so they older design wheels. I have never run a 17 psi wheel. My combo is different from most as I run...

I de-tuned, a Stage 3+ running over 95 mph. I do not have Stage 3 stock cam/stock wheel data. I was looking to de-tune my ski to mph in the 70's.

JesusG set the limiter to 8600 and was trying to...

Contact JesusG. I just detuned my Stage 3 to a stock wheel and we got the tune spot on. You can start with my tune. Now, I have RC-2 cams so the tune will likely be richer. But if you data log you...

I have a Maptuner with 3 skis on it. I have noticed it is getting slower to program and start recording data.

Anyone had tunes or data cleared off the tuner?

Robert

I would trade it in for whatever they give you and move on. Be more timely/careful winterizing next time.

Robert

I think you want to try an exhaust mod first. This will probably give you what you want. Maybe thru hull or free flow. Cam mod is typically part of a bigger build and takes tuning.

Robert

I have had several cams in my 2016 SVHO. Send me a private message.

Robert

You need to have your tuner make an adjustment to get the individual cylinders spot on if the 2013 ECU supports it. Once you get the plugs all the same you should replace the O2 and get the AFRs...

I have never run a 17psi wheel, my Stage 3 wheel was 19psi and RC-2 cam. This hits instantly aggressively hard. I am trying to detune well under 80mph. More like 70mph max. May not be possible. I...

Sounds like you got it all. When you go to prime motor leave the oil filter slightly loose with a rag around it. Prime the motor until oil comes out the filter and tighten. Then a final prime.
...

Got a new tune up this morning and ran the ski. No more stalling, JesusG said he made some changes to fix it. It probably got messed up in the tune last year as the old TB was failing and we were...