Search

looks like it might be at Coffman pipe

look up Partzilla and no show you a Fitch of the Yamaha Wave Venture is item 38 on the exhaust they're supposed to be cooling water running through that and cooling the end of the hose probably...

jims spot on , if over fill oil dumps in to air box.quick check out of water rev up and see if intake hose collapses

did you go in and set usb to port1

would say wear ring BUT had one come in other day drove us nut ,anything above center trim up holeshot fine, trim down sit there and spin prop after all checks got under ski felt at ride shoe and...

no it's something else,do a search there was a way to bring up problem codes

looks like steering stop,has nothing to do with hard starting

what are you checking speed with?

just a shout out to all on green hull ,may you have a great coming new year and may the good lord bring you back here again next year,thank guys for all the info over the years

later cdpcb

we had a few do strange things like that -dess post

Tripples have to spin higher rpm,you may could run protec mod/compare with advent curve

going to inspect oil pump and pull one rod bear0ing to check, most of the trash was in Sump

anyways,got with original owner and seem clutch did fail and dealer would not fix under warranty,someone install new setup and did not clean out all the goody's-great $600 tool on the way hopeing for...

seem so ,will try to get better history on ski,tool to fix $600.00!!!!

that true BUT were did it come from/trash was hoping someone would know were spare parts running around came from

there some type of poting material

ski came in not charging battery,though just stator,but this is what we found anyone seen this before and why?

t337494337495

found this also in bottom of pan

337499

sprag?

if you look at circuit could be fuse or cdi

no ,just r&r bearing and apaly sealer to OD of seals-don't go crazy just thin coat

were $90 per hr ,something like that -service$199.00 + 135 to pump tank.maybe some outer parts involved

just use ngk

rectifier or stator

I`d worry about power valves before bearings

wsm kits use fat bearing,most time there pins on bearing are longer =more area

have you though about checking battery and charging system!