Search

Page 1 of 16 1 2 3 4

Search: Search took 1.00 seconds.

  1. Replies
    6
    Views
    68

    Sounds like you might have an injector that's...

    Sounds like you might have an injector that's stuck open.

    Remove the coil wires to prevent sparks, remove the spark plugs, cover the engine with an old towel, then crank it. You may see a...
  2. Replies
    22
    Views
    310

    It's at least 15 years old and has a lot of...

    It's at least 15 years old and has a lot of power. If you plan to keep it, buy new mounts.

    Put it all together, but put the screws in the driveshaft holder last. Put 3M 4200 Fast Cure on the...
  3. Replies
    22
    Views
    310

    The Rhaas holder is a good one, and about the...

    The Rhaas holder is a good one, and about the same price as OEM.

    If you ride with 4200 to seal the holder, the first time you hit a wave and come down, the pressure in the pump shoe area will...
  4. Pull ALL the connectors apart in the wiring...

    Pull ALL the connectors apart in the wiring harness and check for corrosion. I found a termination plug in my STX-15F that was corroded from laying in water in the bottom of the hull. That didn't...
  5. I know the feeling! You'll have it finished...

    I know the feeling! You'll have it finished before I finish my airplane. Every week I find another part I need to order. One day I just laid under it for 2 hours wondering how in the hell I'm...
  6. Replies
    10
    Views
    179

    At speed, the pissers should be spraying...

    At speed, the pissers should be spraying abundantly. And the water coming out should be about as hot as you can stand to put your hand in, perhaps warmer.

    Look for blockage in the hose from the...
  7. It's the same tank that's used in the carbureted...

    It's the same tank that's used in the carbureted STX 900s and 1100s, so there should be some available. I saw one on Ebay for $65, but I'm sure shipping will kill you--IF the seller can find...
  8. Replies
    128
    Views
    15,721

    If you know of anybody else that wants one, I've...

    If you know of anybody else that wants one, I've seen several in the West Texas Craigslist this year. I'll let you know if you want.
  9. Replies
    4
    Views
    137

    Welcome aboard, SeawardToast! Get rid of the...

    Welcome aboard, SeawardToast!

    Get rid of the bulb and put in a filter. If it has trouble starting when cold, well, many of them do. Either overhaul the carbs and/or put in primers. If you go...
  10. Replies
    4
    Views
    166

    Welcome aboard, Brasseaux985! I have sealed...

    Welcome aboard, Brasseaux985!

    I have sealed all of my displays with 3M 5200 Fast Cure. This is the 'permanent' polyurethane sealant. The fast cure takes at least a day to dry.

    Remove the...
  11. Replies
    5
    Views
    140

    Yes, sir! The whole assembly is 275500358, $26...

    Yes, sir! The whole assembly is 275500358, $26 from Greenhulk. (That's before the Greenhulk discount, too).

    http://partsfinder.onlinemicrofiche.com/4tec/showmodel.asp?type=13&make=seadoopwc&a=76...
  12. Replies
    3
    Views
    145

    I would recommend running a thread chaser through...

    I would recommend running a thread chaser through the hole before putting another spark plug in it. Put anti-seize compound on the plug threads (a little goes a long way). Do NOT overtighten the...
  13. Replies
    8
    Views
    238

    I wouldn't worry about the caps, I'd worry about...

    I wouldn't worry about the caps, I'd worry about the lug nuts! They're on backwards.
  14. Replies
    5
    Views
    140

    I like the old SeaDoo filters. You can clean...

    I like the old SeaDoo filters. You can clean them.

    http://greenhulk.net/forums/attachment.php?attachmentid=460899&stc=1
  15. Looks like there would be room on the boat, what...

    Looks like there would be room on the boat, what 'Ski are you planning to lift? How much does it weigh?
  16. Be careful of junk cable. I've seen copper clad...

    Be careful of junk cable. I've seen copper clad steel wire (magnetic) and copper clad aluminum wire (very light) in circulation. You want real copper wire.
  17. Replies
    14
    Views
    574

    The older Kawasakis are well known for electrical...

    The older Kawasakis are well known for electrical problems. The connectors get water in them and corrode the terminals.

    I'd suggest pulling all of the electrical connectors apart and doing a...
  18. Replies
    63
    Views
    2,194

    The airbox on the Ultra 150 is really a piece of...

    The airbox on the Ultra 150 is really a piece of cake to remove/install. You only have two screws to remove to release the bracket on the inboard side, two hose clamps on the carb adaptors. Swivel...
  19. Replies
    29
    Views
    1,018

    All carbs should be serviced individually. Your...

    All carbs should be serviced individually. Your engine is really three engines on a common crankshaft.
  20. There's a guy that advertises on Craigslist all...

    There's a guy that advertises on Craigslist all the time: Austin Jet Skier. Don't know anything about him.

    Sail & Ski is supposed to be pretty good. One of my Ultra LXs was originally purchased...
  21. Replies
    3
    Views
    242

    Screen name: HiPeRcO LAKESIDE TECH:...

    Screen name: HiPeRcO

    LAKESIDE TECH: Polaris/Kawasaki/TS FICHT EMM Repairs
    $25 off with code "GREENHULK"
    http://lakesidetech.biz/
    http://fb.me/lakesidetech1
  22. Replies
    63
    Views
    2,194

    What is that? Fuel residue? Don't know why it...

    What is that? Fuel residue? Don't know why it would be that high up in the carb.

    That looks like it will clean up easily, but you'll need to clean the fuel tank, pump (which isn't supposed to be...
  23. Replies
    2
    Views
    182

    BRAND NEW Kawasaki 1991 Jet Mate!

    Out of my price range, but this is cool!

    https://dallas.craigslist.org/dal/boa/d/rowlett-kawasaki-jet-mate-1991/7103964811.html

    Text from the ad:
    THIS IS A NEW 1991 KAWASAKI JET MATE, BOUGHT...
  24. I've got a 310X. I like it, but so does my wife....

    I've got a 310X. I like it, but so does my wife. She has claimed it as her own...
  25. Replies
    63
    Views
    2,194

    Kawasaki had a lot of quality control problems...

    Kawasaki had a lot of quality control problems with the oil pump cables. I got one that came new in the package with loose strands, cut myself trying to put it on. I got a replacement that was OK. ...
Results 1 to 25 of 400
Page 1 of 16 1 2 3 4