Search

Still got it ? Pm me

All the oil will come out the pto where the drive shaft goes. I don’t recommend it

I have a riva can logger I’ll be selling here soon but you need a map tuner to use it with a logging license.

So I I have decide and I ordered the new style stator. I’m still having voltage issues and today I went to go re start my ski after running it an hour to put on the trailer and it was completely...

That’s that sounds like a better way to do it .. I guess I could even extend the wires if I needed too.. I replaced the regulator and I’m not quite sure yet if that fixed my issue.. if not I’ll be...

Nice job! I bet you could have got away with just doing the plastic welding .. I have plastic welded a few sparks with ok results.. I always wondered if that more expensive hot air welder would be...

Damn ! Yea leaving the hose on it not running is definitely the issue .. hope the bearings are not shot .

No but you need a candoo to program the key and you just hook the vt wire to switched power.
http://greenhulk.net/forums/attachment.php?attachmentid=471226&stc=1

I also did a little mod with my key! I now have the new style key. I’m so glad I did this no more messing with my key to start it!

https://youtu.be/vaRhBOGbxsc

Hell yea I got it working!! This wasn’t exactly simple as there where some unforeseen issues but it works!!

https://youtu.be/vaRhBOGbxsc

Thank you for this . I have a lot in to my ski I would say it’s worth easily 20k at this point . So this is good to know.

Sorry to bring up an old thread but how did this work out? My key on my 2010 is a pain in the a$$ and this would be a great mod! How did you do the wiring where did you pull the extra 12v from?

http://greenhulk.net/forums/attachment.php?attachmentid=470961&stc=1...

Well I was forced in to rebuilding my own motor due to a shitty shop In houston with no integrity fucking me over.. But moving forward I rebuilt this whole motor my self and amazingly it work and...

good luck I had to sawzal mine out lol

what speeds and rpm are you seeing with that xxx wheel?

Here is the wiring diagram for the stock setup. I want to do a 8” speaker upgrade and upgrade my girls 2020 gtx before summer. I want to do it where it uses the factory controller so if he doesn’t...

I still have these.. they are good for a 2008 and below skis..

Well I decided to sell this thing and move to the Dashpac ultimate. It eliminates a lot of steps for me as far as getting a log. Now I don’t even have to come off the water to get a log! The new...

I didn’t do my valves first time around ended up regretting it and pulling the head back off to do it ..

yea that's what im thinking? I don't know what's up with that. SO if you have a logger yours won't update until you make those changes. I haven't tried it yet im going to try it as soon as it...

Exactly what im going to end up doing! thanks you so much for this information.

im still down to sell it when I get another log or 2 .

So I got it figured out . What happened was that the server ip for their ota updates changed .. so it needed to be reconfigured and it worked abs updated to .k I’m guess that’s the latest ?

post pics.. I bet they are supposed to be like your exhaust side !