Search

Which intake grate are you running? I hated how my GP handled in rough water until I switched to the riva gen2 grate. It’s like a whole new machine when it gets rough now

I just don’t get why so many people are afraid to drill a hole in these things. If you want to modify the ski you’re going to have to drill something at some time.

With the border closed that’s not a good idea. They are enforcing the border. When the border reopens then maybe it will be normal again.

Yeah right. And I suppose Yamaha is getting rid of blue too

Pull the mfd and check the voltage on the red/purple and black wires in the connector for the mfd. I’m going to guess your mfd may have an issue. If it was actually .2 volts the mfd wouldn’t even...

The bypass valve opens around 3000 rpm. The thermostat allows the engine to build heat at low speeds. I never removed the thermostats on any Polaris

I had a bolt break off in that insert too. I was able to unbolt the ride motor and push it into the hull. I popped the bracket out by putting a bolt in and hitting it with a hammer to break the...

Yes to all. Depending on the the time of year or what promotion Yamaha is doing you may get more than one year when you buy the ski. I got 3 years with mine when I bought it

You buy it separately from Yamaha

My guess would be that the pins just weren’t seated in the connector properly when they were initially assembled

So where does this piece thread into?

2 things. The supercharger clutch may not be good. They can spin only one way when you try with your fingers yet slip under load. The other possibility is a boost leak. Does it run any better with...

Have you had a ski that didn’t have issues? Seems like there’s people around here that manage to break every ski they ever touch

Get the Riva gen 2 grate. It’s the best mod I’ve made to my ski besides the ride plate and tune

Id go the other way. Rear exhaust with the stock water box. Anything louder with the exhaust exit in the pump tunnel will sound really bad. That pump tunnel is kind of a megaphone

Don’t bother with the free flow. It sounds awful. I rode a GP with the free flow and it annoyed the hell out of me. Do the rear exit if you want to get rid of the factory exhaust. It sounds good...

The big water tank thing. The part that the u shape hose from the water box goes into is what I assume he’s talking about

Put it together and let it rip. Just be aware that the tune requires 93 octane fuel.

i bet it’s the throttle body mount. Pull the intake manifold and have a look. Wouldn’t be a bad idea to replace the mount with one of the billet pieces anyways

This sounds completely plausible to me. I replaced that throttle body mount as one of the first things I did to my ski when it was new

SVHO engines require a minimum of 91 octane fuel. Says so in the owners manual and the decal on the machine near the fuel fill

It is a little louder but not annoying by any means

If you already have an FX aid go for a GP. The GP will be a little rougher ride but it’s not bad in my opinion. But you get another ski choice in your stable that’s different than the rest

I stopped by south shore today. It’s the same deal as last year so far. Use at your own risk. I launched a bunch of times there last year. The water levels have come way down so I’m thinking it...

I use tarp clips to hold it on They clamp on to the edge of the cover and then I use bungee cords on the clips to hold the rear of the cover on